Finance and Insurance Service (FAIS)
1.0.0 - trial-use International flag

This page is part of the IHE ITI Finance and Insurance Services (v1.0.0: Publication) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: FAISClaim - Detailed Descriptions

Active as of 2024-11-13

Definitions for the IHE.FAIS.Claim resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Claim
2. Claim.implicitRules
Control0..0
4. Claim.extension
SlicingThis element introduces a set of slices on Claim.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Claim.extension:statusReason
    Slice NamestatusReason
    Control0..1
    TypeExtension(Request Status Reason) (Extension Type: CodeableConcept)
    8. Claim.modifierExtension
    Control0..0
    10. Claim.related
    12. Claim.related.claim
    TypeReference(FAIS Claim Profile)

    Guidance on how to interpret the contents of this table can be found here

    0. Claim
    Definition

    A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

    ShortClaim, Pre-determination or Pre-authorization
    Comments

    The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. Claim.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..01
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Claim.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Claim.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 6. Claim.extension:statusReason
      Slice NamestatusReason
      Definition

      Captures the reason for the current state of the resource.

      ShortRequest Status Reason
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Request Status Reason) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      8. Claim.modifierExtension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensionExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..0*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      10. Claim.status
      Definition

      The status of the resource instance.

      Shortactive | cancelled | draft | entered-in-error
      Comments

      This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|4.0.1
      (required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

      A code specifying the state of the resource instance.

      Typecode
      Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Claim.type
      Definition

      The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

      ShortCategory or discipline
      Comments

      The majority of jurisdictions use: oral, pharmacy, vision, professional and institutional, or variants on those terms, as the general styles of claims. The valueset is extensible to accommodate other jurisdictional requirements.

      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodeshttp://hl7.org/fhir/ValueSet/claim-type
      (extensible to http://hl7.org/fhir/ValueSet/claim-type)

      The type or discipline-style of the claim.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Requirements

      Claim type determine the general sets of business rules applied for information requirements and adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Claim.use
      Definition

      A code to indicate whether the nature of the request is: to request adjudication of products and services previously rendered; or requesting authorization and adjudication for provision in the future; or requesting the non-binding adjudication of the listed products and services which could be provided in the future.

      Shortclaim | preauthorization | predetermination
      Control1..1
      BindingThe codes SHALL be taken from Usehttp://hl7.org/fhir/ValueSet/claim-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/claim-use|4.0.1)

      The purpose of the Claim: predetermination, preauthorization, claim.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      This element is required to understand the nature of the request for adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Claim.patient
      Definition

      The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

      ShortThe recipient of the products and services
      Control1..1
      TypeReference(Patient)
      Is Modifierfalse
      Summarytrue
      Requirements

      The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Claim.created
      Definition

      The date this resource was created.

      ShortResource creation date
      Comments

      This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

      Control1..1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to record a timestamp for use by both the recipient and the issuer.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Claim.provider
      Definition

      The provider which is responsible for the claim, predetermination or preauthorization.

      ShortParty responsible for the claim
      Comments

      Typically this field would be 1..1 where this party is responsible for the claim but not necessarily professionally responsible for the provision of the individual products and services listed below.

      Control1..1
      TypeReference(Practitioner, PractitionerRole, Organization)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Claim.priority
      Definition

      The provider-required urgency of processing the request. Typical values include: stat, routine deferred.

      ShortDesired processing ugency
      Comments

      If a claim processor is unable to complete the processing as per the priority then they should generate and error and not process the request.

      Control1..1
      BindingFor example codes, see ProcessPriorityCodeshttp://hl7.org/fhir/ValueSet/process-priority
      (example to http://hl7.org/fhir/ValueSet/process-priority)

      The timeliness with which processing is required: stat, normal, deferred.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Requirements

      The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Claim.insurance
      Definition

      Financial instruments for reimbursement for the health care products and services specified on the claim.

      ShortPatient insurance information
      Comments

      All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

      Control1..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Requirements

      At least one insurer is required for a claim to be a claim.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Claim.insurance.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      28. Claim.insurance.sequence
      Definition

      A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

      ShortInsurance instance identifier
      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      To maintain order of the coverages.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Claim.insurance.focal
      Definition

      A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

      ShortCoverage to be used for adjudication
      Comments

      A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

      Control1..1
      Typeboolean
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      To identify which coverage in the list is being used to adjudicate this claim.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Claim.insurance.coverage
      Definition

      Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

      ShortInsurance information
      Control1..1
      TypeReference(Coverage)
      Is Modifierfalse
      Summarytrue
      Requirements

      Required to allow the adjudicator to locate the correct policy and history within their information system.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Claim
      Definition

      A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

      ShortClaim, Pre-determination or Pre-authorization
      Comments

      The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. Claim.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Claim.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Claim.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..0
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Claim.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Claim.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Claim.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Claim.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Claim.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Claim.extension:statusReason
        Slice NamestatusReason
        Definition

        Captures the reason for the current state of the resource.

        ShortRequest Status Reason
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(Request Status Reason) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. Claim.modifierExtension
        Definition

        An Extension

        ShortExtension
        Control0..0
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. Claim.identifier
        Definition

        A unique identifier assigned to this claim.

        ShortBusiness Identifier for claim
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summaryfalse
        Requirements

        Allows claims to be distinguished and referenced.

        Alternate NamesClaim Number
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Claim.status
        Definition

        The status of the resource instance.

        Shortactive | cancelled | draft | entered-in-error
        Comments

        This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from FinancialResourceStatusCodes
        (required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

        A code specifying the state of the resource instance.

        Typecode
        Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. Claim.type
        Definition

        The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

        ShortCategory or discipline
        Comments

        The majority of jurisdictions use: oral, pharmacy, vision, professional and institutional, or variants on those terms, as the general styles of claims. The valueset is extensible to accommodate other jurisdictional requirements.

        Control1..1
        BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodes
        (extensible to http://hl7.org/fhir/ValueSet/claim-type)

        The type or discipline-style of the claim.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Claim type determine the general sets of business rules applied for information requirements and adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. Claim.subType
        Definition

        A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

        ShortMore granular claim type
        Comments

        This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

        Control0..1
        BindingFor example codes, see ExampleClaimSubTypeCodes
        (example to http://hl7.org/fhir/ValueSet/claim-subtype)

        A more granular claim typecode.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Some jurisdictions need a finer grained claim type for routing and adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Claim.use
        Definition

        A code to indicate whether the nature of the request is: to request adjudication of products and services previously rendered; or requesting authorization and adjudication for provision in the future; or requesting the non-binding adjudication of the listed products and services which could be provided in the future.

        Shortclaim | preauthorization | predetermination
        Control1..1
        BindingThe codes SHALL be taken from Use
        (required to http://hl7.org/fhir/ValueSet/claim-use|4.0.1)

        The purpose of the Claim: predetermination, preauthorization, claim.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        This element is required to understand the nature of the request for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Claim.patient
        Definition

        The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

        ShortThe recipient of the products and services
        Control1..1
        TypeReference(Patient)
        Is Modifierfalse
        Summarytrue
        Requirements

        The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Claim.billablePeriod
        Definition

        The period for which charges are being submitted.

        ShortRelevant time frame for the claim
        Comments

        Typically this would be today or in the past for a claim, and today or in the future for preauthorizations and predeterminations. Typically line item dates of service should fall within the billing period if one is specified.

        Control0..1
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Requirements

        A number jurisdictions required the submission of the billing period when submitting claims for example for hospital stays or long-term care.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Claim.created
        Definition

        The date this resource was created.

        ShortResource creation date
        Comments

        This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

        Control1..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to record a timestamp for use by both the recipient and the issuer.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Claim.enterer
        Definition

        Individual who created the claim, predetermination or preauthorization.

        ShortAuthor of the claim
        Control0..1
        TypeReference(Practitioner, PractitionerRole)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Some jurisdictions require the contact information for personnel completing claims.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Claim.insurer
        Definition

        The Insurer who is target of the request.

        ShortTarget
        Control0..1
        TypeReference(Organization)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Claim.provider
        Definition

        The provider which is responsible for the claim, predetermination or preauthorization.

        ShortParty responsible for the claim
        Comments

        Typically this field would be 1..1 where this party is responsible for the claim but not necessarily professionally responsible for the provision of the individual products and services listed below.

        Control1..1
        TypeReference(Practitioner, PractitionerRole, Organization)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Claim.priority
        Definition

        The provider-required urgency of processing the request. Typical values include: stat, routine deferred.

        ShortDesired processing ugency
        Comments

        If a claim processor is unable to complete the processing as per the priority then they should generate and error and not process the request.

        Control1..1
        BindingFor example codes, see ProcessPriorityCodes
        (example to http://hl7.org/fhir/ValueSet/process-priority)

        The timeliness with which processing is required: stat, normal, deferred.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Claim.fundsReserve
        Definition

        A code to indicate whether and for whom funds are to be reserved for future claims.

        ShortFor whom to reserve funds
        Comments

        This field is only used for preauthorizations.

        Control0..1
        BindingFor example codes, see Funds Reservation Codes
        (example to http://hl7.org/fhir/ValueSet/fundsreserve)

        For whom funds are to be reserved: (Patient, Provider, None).

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        In the case of a Pre-Determination/Pre-Authorization the provider may request that funds in the amount of the expected Benefit be reserved ('Patient' or 'Provider') to pay for the Benefits determined on the subsequent claim(s). 'None' explicitly indicates no funds reserving is requested.

        Alternate NamesFund pre-allocation
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Claim.related
        Definition

        Other claims which are related to this claim such as prior submissions or claims for related services or for the same event.

        ShortPrior or corollary claims
        Comments

        For example, for the original treatment and follow-up exams.

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        For workplace or other accidents it is common to relate separate claims arising from the same event.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Claim.related.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        50. Claim.related.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        52. Claim.related.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        54. Claim.related.claim
        Definition

        Reference to a related claim.

        ShortReference to the related claim
        Control0..1
        TypeReference(FAIS Claim Profile)
        Is Modifierfalse
        Summaryfalse
        Requirements

        For workplace or other accidents it is common to relate separate claims arising from the same event.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. Claim.related.relationship
        Definition

        A code to convey how the claims are related.

        ShortHow the reference claim is related
        Comments

        For example, prior claim or umbrella.

        Control0..1
        BindingFor example codes, see ExampleRelatedClaimRelationshipCodes
        (example to http://hl7.org/fhir/ValueSet/related-claim-relationship)

        Relationship of this claim to a related Claim.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Some insurers need a declaration of the type of relationship.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. Claim.related.reference
        Definition

        An alternate organizational reference to the case or file to which this particular claim pertains.

        ShortFile or case reference
        Comments

        For example, Property/Casualty insurer claim # or Workers Compensation case # .

        Control0..1
        TypeIdentifier
        Is Modifierfalse
        Summaryfalse
        Requirements

        In cases where an event-triggered claim is being submitted to an insurer which requires a reference number to be specified on all exchanges.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        60. Claim.prescription
        Definition

        Prescription to support the dispensing of pharmacy, device or vision products.

        ShortPrescription authorizing services and products
        Control0..1
        TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required to authorize the dispensing of controlled substances and devices.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. Claim.originalPrescription
        Definition

        Original prescription which has been superseded by this prescription to support the dispensing of pharmacy services, medications or products.

        ShortOriginal prescription if superseded by fulfiller
        Comments

        For example, a physician may prescribe a medication which the pharmacy determines is contraindicated, or for which the patient has an intolerance, and therefore issues a new prescription for an alternate medication which has the same therapeutic intent. The prescription from the pharmacy becomes the 'prescription' and that from the physician becomes the 'original prescription'.

        Control0..1
        TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Often required when a fulfiller varies what is fulfilled from that authorized on the original prescription.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        64. Claim.payee
        Definition

        The party to be reimbursed for cost of the products and services according to the terms of the policy.

        ShortRecipient of benefits payable
        Comments

        Often providers agree to receive the benefits payable to reduce the near-term costs to the patient. The insurer may decline to pay the provider and choose to pay the subscriber instead.

        Control0..1
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        The provider needs to specify who they wish to be reimbursed and the claims processor needs express who they will reimburse.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        66. Claim.payee.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        68. Claim.payee.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        70. Claim.payee.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        72. Claim.payee.type
        Definition

        Type of Party to be reimbursed: subscriber, provider, other.

        ShortCategory of recipient
        Control1..1
        BindingFor example codes, see Claim Payee Type Codes
        (example to http://hl7.org/fhir/ValueSet/payeetype)

        A code for the party to be reimbursed.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Need to know who should receive payment with the most common situations being the Provider (assignment of benefits) or the Subscriber.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        74. Claim.payee.party
        Definition

        Reference to the individual or organization to whom any payment will be made.

        ShortRecipient reference
        Comments

        Not required if the payee is 'subscriber' or 'provider'.

        Control0..1
        TypeReference(Practitioner, PractitionerRole, Organization, Patient, RelatedPerson)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Need to provide demographics if the payee is not 'subscriber' nor 'provider'.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        76. Claim.referral
        Definition

        A reference to a referral resource.

        ShortTreatment referral
        Comments

        The referral resource which lists the date, practitioner, reason and other supporting information.

        Control0..1
        TypeReference(ServiceRequest)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Some insurers require proof of referral to pay for services or to pay specialist rates for services.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        78. Claim.facility
        Definition

        Facility where the services were provided.

        ShortServicing facility
        Control0..1
        TypeReference(Location)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Insurance adjudication can be dependant on where services were delivered.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        80. Claim.careTeam
        Definition

        The members of the team who provided the products and services.

        ShortMembers of the care team
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        Common to identify the responsible and supporting practitioners.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        82. Claim.careTeam.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        84. Claim.careTeam.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        86. Claim.careTeam.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        88. Claim.careTeam.sequence
        Definition

        A number to uniquely identify care team entries.

        ShortOrder of care team
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Necessary to maintain the order of the care team and provide a mechanism to link individuals to claim details.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        90. Claim.careTeam.provider
        Definition

        Member of the team who provided the product or service.

        ShortPractitioner or organization
        Control1..1
        TypeReference(Practitioner, PractitionerRole, Organization)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Often a regulatory requirement to specify the responsible provider.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        92. Claim.careTeam.responsible
        Definition

        The party who is billing and/or responsible for the claimed products or services.

        ShortIndicator of the lead practitioner
        Comments

        Responsible might not be required when there is only a single provider listed.

        Control0..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        When multiple parties are present it is required to distinguish the lead or responsible individual.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        94. Claim.careTeam.role
        Definition

        The lead, assisting or supervising practitioner and their discipline if a multidisciplinary team.

        ShortFunction within the team
        Comments

        Role might not be required when there is only a single provider listed.

        Control0..1
        BindingFor example codes, see ClaimCareTeamRoleCodes
        (example to http://hl7.org/fhir/ValueSet/claim-careteamrole)

        The role codes for the care team members.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        When multiple parties are present it is required to distinguish the roles performed by each member.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        96. Claim.careTeam.qualification
        Definition

        The qualification of the practitioner which is applicable for this service.

        ShortPractitioner credential or specialization
        Control0..1
        BindingFor example codes, see ExampleProviderQualificationCodes
        (example to http://hl7.org/fhir/ValueSet/provider-qualification)

        Provider professional qualifications.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Need to specify which qualification a provider is delivering the product or service under.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        98. Claim.supportingInfo
        Definition

        Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

        ShortSupporting information
        Comments

        Often there are multiple jurisdiction specific valuesets which are required.

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

        Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        100. Claim.supportingInfo.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        102. Claim.supportingInfo.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        104. Claim.supportingInfo.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        106. Claim.supportingInfo.sequence
        Definition

        A number to uniquely identify supporting information entries.

        ShortInformation instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        108. Claim.supportingInfo.category
        Definition

        The general class of the information supplied: information; exception; accident, employment; onset, etc.

        ShortClassification of the supplied information
        Comments

        This may contain a category for the local bill type codes.

        Control1..1
        BindingFor example codes, see ClaimInformationCategoryCodes
        (example to http://hl7.org/fhir/ValueSet/claim-informationcategory)

        The valuset used for additional information category codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        110. Claim.supportingInfo.code
        Definition

        System and code pertaining to the specific information regarding special conditions relating to the setting, treatment or patient for which care is sought.

        ShortType of information
        Control0..1
        BindingFor example codes, see ExceptionCodes
        (example to http://hl7.org/fhir/ValueSet/claim-exception)

        The valuset used for additional information codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required to identify the kind of additional information.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        112. Claim.supportingInfo.timing[x]
        Definition

        The date when or period to which this information refers.

        ShortWhen it occurred
        Control0..1
        TypeChoice of: date, Period
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        114. Claim.supportingInfo.value[x]
        Definition

        Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

        ShortData to be provided
        Comments

        Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

        Control0..1
        TypeChoice of: boolean, string, Quantity, Attachment, Reference(Resource)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        To convey the data content to be provided when the information is more than a simple code or period.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        116. Claim.supportingInfo.reason
        Definition

        Provides the reason in the situation where a reason code is required in addition to the content.

        ShortExplanation for the information
        Comments

        For example: the reason for the additional stay, or why a tooth is missing.

        Control0..1
        BindingFor example codes, see MissingToothReasonCodes
        (example to http://hl7.org/fhir/ValueSet/missing-tooth-reason)

        Reason codes for the missing teeth.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Needed when the supporting information has both a date and amount/value and requires explanation.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        118. Claim.diagnosis
        Definition

        Information about diagnoses relevant to the claim items.

        ShortPertinent diagnosis information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required for the adjudication by provided context for the services and product listed.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        120. Claim.diagnosis.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        122. Claim.diagnosis.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        124. Claim.diagnosis.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        126. Claim.diagnosis.sequence
        Definition

        A number to uniquely identify diagnosis entries.

        ShortDiagnosis instance identifier
        Comments

        Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        128. Claim.diagnosis.diagnosis[x]
        Definition

        The nature of illness or problem in a coded form or as a reference to an external defined Condition.

        ShortNature of illness or problem
        Control1..1
        BindingFor example codes, see ICD-10Codes
        (example to http://hl7.org/fhir/ValueSet/icd-10)

        Example ICD10 Diagnostic codes.

        TypeChoice of: CodeableConcept, Reference(Condition)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Requirements

        Provides health context for the evaluation of the products and/or services.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        130. Claim.diagnosis.type
        Definition

        When the condition was observed or the relative ranking.

        ShortTiming or nature of the diagnosis
        Comments

        For example: admitting, primary, secondary, discharge.

        Control0..*
        BindingFor example codes, see ExampleDiagnosisTypeCodes
        (example to http://hl7.org/fhir/ValueSet/ex-diagnosistype)

        The type of the diagnosis: admitting, principal, discharge.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Often required to capture a particular diagnosis, for example: primary or discharge.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        132. Claim.diagnosis.onAdmission
        Definition

        Indication of whether the diagnosis was present on admission to a facility.

        ShortPresent on admission
        Control0..1
        BindingFor example codes, see ExampleDiagnosisOnAdmissionCodes
        (example to http://hl7.org/fhir/ValueSet/ex-diagnosis-on-admission)

        Present on admission.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Many systems need to understand for adjudication if the diagnosis was present a time of admission.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        134. Claim.diagnosis.packageCode
        Definition

        A package billing code or bundle code used to group products and services to a particular health condition (such as heart attack) which is based on a predetermined grouping code system.

        ShortPackage billing code
        Comments

        For example DRG (Diagnosis Related Group) or a bundled billing code. A patient may have a diagnosis of a Myocardial Infarction and a DRG for HeartAttack would be assigned. The Claim item (and possible subsequent claims) would refer to the DRG for those line items that were for services related to the heart attack event.

        Control0..1
        BindingFor example codes, see ExampleDiagnosisRelatedGroupCodes
        (example to http://hl7.org/fhir/ValueSet/ex-diagnosisrelatedgroup)

        The DRG codes associated with the diagnosis.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required to relate the current diagnosis to a package billing code that is then referenced on the individual claim items which are specific to the health condition covered by the package code.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        136. Claim.procedure
        Definition

        Procedures performed on the patient relevant to the billing items with the claim.

        ShortClinical procedures performed
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        The specific clinical invention are sometimes required to be provided to justify billing a greater than customary amount for a service.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        138. Claim.procedure.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        140. Claim.procedure.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        142. Claim.procedure.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        144. Claim.procedure.sequence
        Definition

        A number to uniquely identify procedure entries.

        ShortProcedure instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Necessary to provide a mechanism to link to claim details.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        146. Claim.procedure.type
        Definition

        When the condition was observed or the relative ranking.

        ShortCategory of Procedure
        Comments

        For example: primary, secondary.

        Control0..*
        BindingFor example codes, see ExampleProcedureTypeCodes
        (example to http://hl7.org/fhir/ValueSet/ex-procedure-type)

        Example procedure type codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Often required to capture a particular diagnosis, for example: primary or discharge.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        148. Claim.procedure.date
        Definition

        Date and optionally time the procedure was performed.

        ShortWhen the procedure was performed
        Control0..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Required for auditing purposes.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        150. Claim.procedure.procedure[x]
        Definition

        The code or reference to a Procedure resource which identifies the clinical intervention performed.

        ShortSpecific clinical procedure
        Control1..1
        BindingFor example codes, see ICD-10ProcedureCodes
        (example to http://hl7.org/fhir/ValueSet/icd-10-procedures)

        Example ICD10 Procedure codes.

        TypeChoice of: CodeableConcept, Reference(Procedure)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Requirements

        This identifies the actual clinical procedure.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        152. Claim.procedure.udi
        Definition

        Unique Device Identifiers associated with this line item.

        ShortUnique device identifier
        Control0..*
        TypeReference(Device)
        Is Modifierfalse
        Summaryfalse
        Requirements

        The UDI code allows the insurer to obtain device level information on the product supplied.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        154. Claim.insurance
        Definition

        Financial instruments for reimbursement for the health care products and services specified on the claim.

        ShortPatient insurance information
        Comments

        All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

        Control1..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Requirements

        At least one insurer is required for a claim to be a claim.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        156. Claim.insurance.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        158. Claim.insurance.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        160. Claim.insurance.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        162. Claim.insurance.sequence
        Definition

        A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

        ShortInsurance instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        To maintain order of the coverages.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        164. Claim.insurance.focal
        Definition

        A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

        ShortCoverage to be used for adjudication
        Comments

        A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

        Control1..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        To identify which coverage in the list is being used to adjudicate this claim.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        166. Claim.insurance.identifier
        Definition

        The business identifier to be used when the claim is sent for adjudication against this insurance policy.

        ShortPre-assigned Claim number
        Comments

        Only required in jurisdictions where insurers, rather than the provider, are required to send claims to insurers that appear after them in the list. This element is not required when 'subrogation=true'.

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        TypeIdentifier
        Is Modifierfalse
        Summaryfalse
        Requirements

        This will be the claim number should it be necessary to create this claim in the future. This is provided so that payors may forward claims to other payors in the Coordination of Benefit for adjudication rather than the provider being required to initiate each adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        168. Claim.insurance.coverage
        Definition

        Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

        ShortInsurance information
        Control1..1
        TypeReference(Coverage)
        Is Modifierfalse
        Summarytrue
        Requirements

        Required to allow the adjudicator to locate the correct policy and history within their information system.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        170. Claim.insurance.businessArrangement
        Definition

        A business agreement number established between the provider and the insurer for special business processing purposes.

        ShortAdditional provider contract number
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Providers may have multiple business arrangements with a given insurer and must supply the specific contract number for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        172. Claim.insurance.preAuthRef
        Definition

        Reference numbers previously provided by the insurer to the provider to be quoted on subsequent claims containing services or products related to the prior authorization.

        ShortPrior authorization reference number
        Comments

        This value is an alphanumeric string that may be provided over the phone, via text, via paper, or within a ClaimResponse resource and is not a FHIR Identifier.

        Control0..*
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Providers must quote previously issued authorization reference numbers in order to obtain adjudication as previously advised on the Preauthorization.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        174. Claim.insurance.claimResponse
        Definition

        The result of the adjudication of the line items for the Coverage specified in this insurance.

        ShortAdjudication results
        Comments

        Must not be specified when 'focal=true' for this insurance.

        Control0..1
        TypeReference(ClaimResponse)
        Is Modifierfalse
        Summaryfalse
        Requirements

        An insurer need the adjudication results from prior insurers to determine the outstanding balance remaining by item for the items in the curent claim.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        176. Claim.accident
        Definition

        Details of an accident which resulted in injuries which required the products and services listed in the claim.

        ShortDetails of the event
        Control0..1
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        When healthcare products and services are accident related, benefits may be payable under accident provisions of policies, such as automotive, etc before they are payable under normal health insurance.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        178. Claim.accident.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        180. Claim.accident.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        182. Claim.accident.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        184. Claim.accident.date
        Definition

        Date of an accident event related to the products and services contained in the claim.

        ShortWhen the incident occurred
        Comments

        The date of the accident has to precede the dates of the products and services but within a reasonable timeframe.

        Control1..1
        Typedate
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Required for audit purposes and adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        186. Claim.accident.type
        Definition

        The type or context of the accident event for the purposes of selection of potential insurance coverages and determination of coordination between insurers.

        ShortThe nature of the accident
        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from ActIncidentCode
        (extensible to http://terminology.hl7.org/ValueSet/v3-ActIncidentCode)

        Type of accident: work place, auto, etc.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Coverage may be dependant on the type of accident.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        188. Claim.accident.location[x]
        Definition

        The physical location of the accident event.

        ShortWhere the event occurred
        Control0..1
        TypeChoice of: Address, Reference(Location)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required for audit purposes and determination of applicable insurance liability.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        190. Claim.item
        Definition

        A claim line. Either a simple product or service or a 'group' of details which can each be a simple items or groups of sub-details.

        ShortProduct or service provided
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        The items to be processed for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        192. Claim.item.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        194. Claim.item.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        196. Claim.item.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        198. Claim.item.sequence
        Definition

        A number to uniquely identify item entries.

        ShortItem instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        200. Claim.item.careTeamSequence
        Definition

        CareTeam members related to this service or product.

        ShortApplicable careTeam members
        Control0..*
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Need to identify the individuals and their roles in the provision of the product or service.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        202. Claim.item.diagnosisSequence
        Definition

        Diagnosis applicable for this service or product.

        ShortApplicable diagnoses
        Control0..*
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Need to related the product or service to the associated diagnoses.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        204. Claim.item.procedureSequence
        Definition

        Procedures applicable for this service or product.

        ShortApplicable procedures
        Control0..*
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Need to provide any listed specific procedures to support the product or service being claimed.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        206. Claim.item.informationSequence
        Definition

        Exceptions, special conditions and supporting information applicable for this service or product.

        ShortApplicable exception and supporting information
        Control0..*
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Need to reference the supporting information items that relate directly to this product or service.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        208. Claim.item.revenue
        Definition

        The type of revenue or cost center providing the product and/or service.

        ShortRevenue or cost center code
        Control0..1
        BindingFor example codes, see ExampleRevenueCenterCodes
        (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

        Codes for the revenue or cost centers supplying the service and/or products.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Needed in the processing of institutional claims.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        210. Claim.item.category
        Definition

        Code to identify the general type of benefits under which products and services are provided.

        ShortBenefit classification
        Comments

        Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

        Control0..1
        BindingFor example codes, see BenefitCategoryCodes
        (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory)

        Benefit categories such as: oral-basic, major, glasses.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        212. Claim.item.productOrService
        Definition

        When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

        ShortBilling, service, product, or drug code
        Comments

        If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

        Control1..1
        BindingFor example codes, see USCLSCodes
        (example to http://hl7.org/fhir/ValueSet/service-uscls)

        Allowable service and product codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Necessary to state what was provided or done.

        Alternate NamesDrug Code, Bill Code, Service Code
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        214. Claim.item.modifier
        Definition

        Item typification or modifiers codes to convey additional context for the product or service.

        ShortProduct or service billing modifiers
        Comments

        For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

        Control0..*
        BindingFor example codes, see ModifierTypeCodes
        (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

        Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        To support inclusion of the item for adjudication or to charge an elevated fee.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        216. Claim.item.programCode
        Definition

        Identifies the program under which this may be recovered.

        ShortProgram the product or service is provided under
        Comments

        For example: Neonatal program, child dental program or drug users recovery program.

        Control0..*
        BindingFor example codes, see ExampleProgramReasonCodes
        (example to http://hl7.org/fhir/ValueSet/ex-program-code)

        Program specific reason codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        218. Claim.item.serviced[x]
        Definition

        The date or dates when the service or product was supplied, performed or completed.

        ShortDate or dates of service or product delivery
        Control0..1
        TypeChoice of: date, Period
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Needed to determine whether the service or product was provided during the term of the insurance coverage.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        220. Claim.item.location[x]
        Definition

        Where the product or service was provided.

        ShortPlace of service or where product was supplied
        Control0..1
        BindingFor example codes, see ExampleServicePlaceCodes
        (example to http://hl7.org/fhir/ValueSet/service-place)

        Place of service: pharmacy, school, prison, etc.

        TypeChoice of: CodeableConcept, Address, Reference(Location)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Requirements

        The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        222. Claim.item.quantity
        Definition

        The number of repetitions of a service or product.

        ShortCount of products or services
        Control0..1
        TypeQuantity(SimpleQuantity)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required when the product or service code does not convey the quantity provided.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        224. Claim.item.unitPrice
        Definition

        If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

        ShortFee, charge or cost per item
        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        The amount charged to the patient by the provider for a single unit.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        226. Claim.item.factor
        Definition

        A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

        ShortPrice scaling factor
        Comments

        To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        228. Claim.item.net
        Definition

        The quantity times the unit price for an additional service or product or charge.

        ShortTotal item cost
        Comments

        For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        Provides the total amount claimed for the group (if a grouper) or the line item.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        230. Claim.item.udi
        Definition

        Unique Device Identifiers associated with this line item.

        ShortUnique device identifier
        Control0..*
        TypeReference(Device)
        Is Modifierfalse
        Summaryfalse
        Requirements

        The UDI code allows the insurer to obtain device level information on the product supplied.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        232. Claim.item.bodySite
        Definition

        Physical service site on the patient (limb, tooth, etc.).

        ShortAnatomical location
        Comments

        For example: Providing a tooth code, allows an insurer to identify a provider performing a filling on a tooth that was previously removed.

        Control0..1
        BindingFor example codes, see OralSiteCodes
        (example to http://hl7.org/fhir/ValueSet/tooth)

        The code for the teeth, quadrant, sextant and arch.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Allows insurer to validate specific procedures.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        234. Claim.item.subSite
        Definition

        A region or surface of the bodySite, e.g. limb region or tooth surface(s).

        ShortAnatomical sub-location
        Control0..*
        BindingFor example codes, see SurfaceCodes
        (example to http://hl7.org/fhir/ValueSet/surface)

        The code for the tooth surface and surface combinations.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Allows insurer to validate specific procedures.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        236. Claim.item.encounter
        Definition

        The Encounters during which this Claim was created or to which the creation of this record is tightly associated.

        ShortEncounters related to this billed item
        Comments

        This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

        Control0..*
        TypeReference(Encounter)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Used in some jurisdictions to link clinical events to claim items.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        238. Claim.item.detail
        Definition

        A claim detail line. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

        ShortProduct or service provided
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        The items to be processed for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        240. Claim.item.detail.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        242. Claim.item.detail.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        244. Claim.item.detail.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        246. Claim.item.detail.sequence
        Definition

        A number to uniquely identify item entries.

        ShortItem instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        248. Claim.item.detail.revenue
        Definition

        The type of revenue or cost center providing the product and/or service.

        ShortRevenue or cost center code
        Control0..1
        BindingFor example codes, see ExampleRevenueCenterCodes
        (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

        Codes for the revenue or cost centers supplying the service and/or products.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Needed in the processing of institutional claims.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        250. Claim.item.detail.category
        Definition

        Code to identify the general type of benefits under which products and services are provided.

        ShortBenefit classification
        Comments

        Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

        Control0..1
        BindingFor example codes, see BenefitCategoryCodes
        (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory)

        Benefit categories such as: oral-basic, major, glasses.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        252. Claim.item.detail.productOrService
        Definition

        When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

        ShortBilling, service, product, or drug code
        Comments

        If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

        Control1..1
        BindingFor example codes, see USCLSCodes
        (example to http://hl7.org/fhir/ValueSet/service-uscls)

        Allowable service and product codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Necessary to state what was provided or done.

        Alternate NamesDrug Code, Bill Code, Service Code
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        254. Claim.item.detail.modifier
        Definition

        Item typification or modifiers codes to convey additional context for the product or service.

        ShortService/Product billing modifiers
        Comments

        For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours.

        Control0..*
        BindingFor example codes, see ModifierTypeCodes
        (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

        Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        To support inclusion of the item for adjudication or to charge an elevated fee.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        256. Claim.item.detail.programCode
        Definition

        Identifies the program under which this may be recovered.

        ShortProgram the product or service is provided under
        Comments

        For example: Neonatal program, child dental program or drug users recovery program.

        Control0..*
        BindingFor example codes, see ExampleProgramReasonCodes
        (example to http://hl7.org/fhir/ValueSet/ex-program-code)

        Program specific reason codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        258. Claim.item.detail.quantity
        Definition

        The number of repetitions of a service or product.

        ShortCount of products or services
        Control0..1
        TypeQuantity(SimpleQuantity)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required when the product or service code does not convey the quantity provided.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        260. Claim.item.detail.unitPrice
        Definition

        If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

        ShortFee, charge or cost per item
        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        The amount charged to the patient by the provider for a single unit.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        262. Claim.item.detail.factor
        Definition

        A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

        ShortPrice scaling factor
        Comments

        To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        264. Claim.item.detail.net
        Definition

        The quantity times the unit price for an additional service or product or charge.

        ShortTotal item cost
        Comments

        For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        Provides the total amount claimed for the group (if a grouper) or the line item.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        266. Claim.item.detail.udi
        Definition

        Unique Device Identifiers associated with this line item.

        ShortUnique device identifier
        Control0..*
        TypeReference(Device)
        Is Modifierfalse
        Summaryfalse
        Requirements

        The UDI code allows the insurer to obtain device level information on the product supplied.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        268. Claim.item.detail.subDetail
        Definition

        A claim detail line. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

        ShortProduct or service provided
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        The items to be processed for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        270. Claim.item.detail.subDetail.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        272. Claim.item.detail.subDetail.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        274. Claim.item.detail.subDetail.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        276. Claim.item.detail.subDetail.sequence
        Definition

        A number to uniquely identify item entries.

        ShortItem instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        278. Claim.item.detail.subDetail.revenue
        Definition

        The type of revenue or cost center providing the product and/or service.

        ShortRevenue or cost center code
        Control0..1
        BindingFor example codes, see ExampleRevenueCenterCodes
        (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

        Codes for the revenue or cost centers supplying the service and/or products.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Needed in the processing of institutional claims.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        280. Claim.item.detail.subDetail.category
        Definition

        Code to identify the general type of benefits under which products and services are provided.

        ShortBenefit classification
        Comments

        Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

        Control0..1
        BindingFor example codes, see BenefitCategoryCodes
        (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory)

        Benefit categories such as: oral-basic, major, glasses.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        282. Claim.item.detail.subDetail.productOrService
        Definition

        When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

        ShortBilling, service, product, or drug code
        Comments

        If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

        Control1..1
        BindingFor example codes, see USCLSCodes
        (example to http://hl7.org/fhir/ValueSet/service-uscls)

        Allowable service and product codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Necessary to state what was provided or done.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        284. Claim.item.detail.subDetail.modifier
        Definition

        Item typification or modifiers codes to convey additional context for the product or service.

        ShortService/Product billing modifiers
        Comments

        For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours.

        Control0..*
        BindingFor example codes, see ModifierTypeCodes
        (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

        Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        To support inclusion of the item for adjudication or to charge an elevated fee.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        286. Claim.item.detail.subDetail.programCode
        Definition

        Identifies the program under which this may be recovered.

        ShortProgram the product or service is provided under
        Comments

        For example: Neonatal program, child dental program or drug users recovery program.

        Control0..*
        BindingFor example codes, see ExampleProgramReasonCodes
        (example to http://hl7.org/fhir/ValueSet/ex-program-code)

        Program specific reason codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        288. Claim.item.detail.subDetail.quantity
        Definition

        The number of repetitions of a service or product.

        ShortCount of products or services
        Control0..1
        TypeQuantity(SimpleQuantity)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required when the product or service code does not convey the quantity provided.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        290. Claim.item.detail.subDetail.unitPrice
        Definition

        If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

        ShortFee, charge or cost per item
        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        The amount charged to the patient by the provider for a single unit.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        292. Claim.item.detail.subDetail.factor
        Definition

        A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

        ShortPrice scaling factor
        Comments

        To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        294. Claim.item.detail.subDetail.net
        Definition

        The quantity times the unit price for an additional service or product or charge.

        ShortTotal item cost
        Comments

        For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        Provides the total amount claimed for the group (if a grouper) or the line item.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        296. Claim.item.detail.subDetail.udi
        Definition

        Unique Device Identifiers associated with this line item.

        ShortUnique device identifier
        Control0..*
        TypeReference(Device)
        Is Modifierfalse
        Summaryfalse
        Requirements

        The UDI code allows the insurer to obtain device level information on the product supplied.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        298. Claim.total
        Definition

        The total value of the all the items in the claim.

        ShortTotal claim cost
        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        Used for control total purposes.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))