Finance and Insurance Service (FAIS)
1.0.0 - trial-use
This page is part of the IHE ITI Finance and Insurance Services (v1.0.0: Publication) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions
Active as of 2024-11-13 |
Definitions for the IHE.FAIS.CoverageEligibilityResponse resource profile.
Guidance on how to interpret the contents of this table can be found here
0. CoverageEligibilityResponse | |
2. CoverageEligibilityResponse.implicitRules | |
Control | 0..0 |
4. CoverageEligibilityResponse.modifierExtension | |
Control | 0..0 |
6. CoverageEligibilityResponse.request | |
Type | Reference(FAIS CoverageEligibilityRequest Profile) |
Guidance on how to interpret the contents of this table can be found here
0. CoverageEligibilityResponse | |
Definition | This resource provides eligibility and plan details from the processing of an CoverageEligibilityRequest resource. |
Short | CoverageEligibilityResponse resource |
Control | 0..* |
Is Modifier | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) |
2. CoverageEligibilityResponse.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..01 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. CoverageEligibilityResponse.modifierExtension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | ExtensionExtensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
6. CoverageEligibilityResponse.status | |
Definition | The status of the resource instance. |
Short | active | cancelled | draft | entered-in-error |
Comments | This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. |
Control | 1..1 |
Binding | The codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|4.0.1 (required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1 )A code specifying the state of the resource instance. |
Type | code |
Is Modifier | true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
8. CoverageEligibilityResponse.purpose | |
Definition | Code to specify whether requesting: prior authorization requirements for some service categories or billing codes; benefits for coverages specified or discovered; discovery and return of coverages for the patient; and/or validation that the specified coverage is in-force at the date/period specified or 'now' if not specified. |
Short | auth-requirements | benefits | discovery | validation |
Control | 1..* |
Binding | The codes SHALL be taken from EligibilityResponsePurposehttp://hl7.org/fhir/ValueSet/eligibilityresponse-purpose|4.0.1 (required to http://hl7.org/fhir/ValueSet/eligibilityresponse-purpose|4.0.1 )A code specifying the types of information being requested. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | To indicate the processing actions requested. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. CoverageEligibilityResponse.patient | |
Definition | The party who is the beneficiary of the supplied coverage and for whom eligibility is sought. |
Short | Intended recipient of products and services |
Control | 1..1 |
Type | Reference(Patient) |
Is Modifier | false |
Summary | true |
Requirements | Required to provide context and coverage validation. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. CoverageEligibilityResponse.created | |
Definition | The date this resource was created. |
Short | Response creation date |
Control | 1..1 |
Type | dateTime |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to record a timestamp for use by both the recipient and the issuer. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. CoverageEligibilityResponse.request | |
Definition | Reference to the original request resource. |
Short | Eligibility request reference |
Control | 1..1 |
Type | Reference(FAIS CoverageEligibilityRequest Profile, CoverageEligibilityRequest) |
Is Modifier | false |
Summary | true |
Requirements | Needed to allow the response to be linked to the request. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. CoverageEligibilityResponse.outcome | |
Definition | The outcome of the request processing. |
Short | queued | complete | error | partial |
Comments | The resource may be used to indicate that: the request has been held (queued) for processing; that it has been processed and errors found (error); that no errors were found and that some of the adjudication has been undertaken (partial) or that all of the adjudication has been undertaken (complete). |
Control | 1..1 |
Binding | The codes SHALL be taken from ClaimProcessingCodeshttp://hl7.org/fhir/ValueSet/remittance-outcome|4.0.1 (required to http://hl7.org/fhir/ValueSet/remittance-outcome|4.0.1 )The outcome of the processing. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | To advise the requestor of an overall processing outcome. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. CoverageEligibilityResponse.insurer | |
Definition | The Insurer who issued the coverage in question and is the author of the response. |
Short | Coverage issuer |
Control | 1..1 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Requirements | Need to identify the author. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. CoverageEligibilityResponse | |||||
Definition | This resource provides eligibility and plan details from the processing of an CoverageEligibilityRequest resource. | ||||
Short | CoverageEligibilityResponse resource | ||||
Control | 0..* | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() ) | ||||
2. CoverageEligibilityResponse.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Summary | true | ||||
4. CoverageEligibilityResponse.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. CoverageEligibilityResponse.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..0 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
8. CoverageEligibilityResponse.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
10. CoverageEligibilityResponse.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Short | Text summary of the resource, for human interpretation | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
12. CoverageEligibilityResponse.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Short | Contained, inline Resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
14. CoverageEligibilityResponse.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
16. CoverageEligibilityResponse.modifierExtension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
18. CoverageEligibilityResponse.identifier | |||||
Definition | A unique identifier assigned to this coverage eligiblity request. | ||||
Short | Business Identifier for coverage eligiblity request | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Allows coverage eligibility requests to be distinguished and referenced. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
20. CoverageEligibilityResponse.status | |||||
Definition | The status of the resource instance. | ||||
Short | active | cancelled | draft | entered-in-error | ||||
Comments | This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from FinancialResourceStatusCodes (required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1 )A code specifying the state of the resource instance. | ||||
Type | code | ||||
Is Modifier | true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
22. CoverageEligibilityResponse.purpose | |||||
Definition | Code to specify whether requesting: prior authorization requirements for some service categories or billing codes; benefits for coverages specified or discovered; discovery and return of coverages for the patient; and/or validation that the specified coverage is in-force at the date/period specified or 'now' if not specified. | ||||
Short | auth-requirements | benefits | discovery | validation | ||||
Control | 1..* | ||||
Binding | The codes SHALL be taken from EligibilityResponsePurpose (required to http://hl7.org/fhir/ValueSet/eligibilityresponse-purpose|4.0.1 )A code specifying the types of information being requested. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | To indicate the processing actions requested. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
24. CoverageEligibilityResponse.patient | |||||
Definition | The party who is the beneficiary of the supplied coverage and for whom eligibility is sought. | ||||
Short | Intended recipient of products and services | ||||
Control | 1..1 | ||||
Type | Reference(Patient) | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Required to provide context and coverage validation. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
26. CoverageEligibilityResponse.serviced[x] | |||||
Definition | The date or dates when the enclosed suite of services were performed or completed. | ||||
Short | Estimated date or dates of service | ||||
Control | 0..1 | ||||
Type | Choice of: date, Period | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Required to provide time context for the request. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
28. CoverageEligibilityResponse.created | |||||
Definition | The date this resource was created. | ||||
Short | Response creation date | ||||
Control | 1..1 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Need to record a timestamp for use by both the recipient and the issuer. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
30. CoverageEligibilityResponse.requestor | |||||
Definition | The provider which is responsible for the request. | ||||
Short | Party responsible for the request | ||||
Comments | Typically this field would be 1..1 where this party is responsible for the claim but not necessarily professionally responsible for the provision of the individual products and services listed below. | ||||
Control | 0..1 | ||||
Type | Reference(Practitioner, PractitionerRole, Organization) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
32. CoverageEligibilityResponse.request | |||||
Definition | Reference to the original request resource. | ||||
Short | Eligibility request reference | ||||
Control | 1..1 | ||||
Type | Reference(FAIS CoverageEligibilityRequest Profile) | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Needed to allow the response to be linked to the request. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
34. CoverageEligibilityResponse.outcome | |||||
Definition | The outcome of the request processing. | ||||
Short | queued | complete | error | partial | ||||
Comments | The resource may be used to indicate that: the request has been held (queued) for processing; that it has been processed and errors found (error); that no errors were found and that some of the adjudication has been undertaken (partial) or that all of the adjudication has been undertaken (complete). | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from ClaimProcessingCodes (required to http://hl7.org/fhir/ValueSet/remittance-outcome|4.0.1 )The outcome of the processing. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | To advise the requestor of an overall processing outcome. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
36. CoverageEligibilityResponse.disposition | |||||
Definition | A human readable description of the status of the adjudication. | ||||
Short | Disposition Message | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Provided for user display. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
38. CoverageEligibilityResponse.insurer | |||||
Definition | The Insurer who issued the coverage in question and is the author of the response. | ||||
Short | Coverage issuer | ||||
Control | 1..1 | ||||
Type | Reference(Organization) | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Need to identify the author. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
40. CoverageEligibilityResponse.insurance | |||||
Definition | Financial instruments for reimbursement for the health care products and services. | ||||
Short | Patient insurance information | ||||
Comments | All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | There must be at least one coverage for which eligibility is requested. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
42. CoverageEligibilityResponse.insurance.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
44. CoverageEligibilityResponse.insurance.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
46. CoverageEligibilityResponse.insurance.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
48. CoverageEligibilityResponse.insurance.coverage | |||||
Definition | Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system. | ||||
Short | Insurance information | ||||
Control | 1..1 | ||||
Type | Reference(Coverage) | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Required to allow the adjudicator to locate the correct policy and history within their information system. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
50. CoverageEligibilityResponse.insurance.inforce | |||||
Definition | Flag indicating if the coverage provided is inforce currently if no service date(s) specified or for the whole duration of the service dates. | ||||
Short | Coverage inforce indicator | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Needed to convey the answer to the eligibility validation request. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
52. CoverageEligibilityResponse.insurance.benefitPeriod | |||||
Definition | The term of the benefits documented in this response. | ||||
Short | When the benefits are applicable | ||||
Control | 0..1 | ||||
Type | Period | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed as coverages may be multi-year while benefits tend to be annual therefore a separate expression of the benefit period is needed. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
54. CoverageEligibilityResponse.insurance.item | |||||
Definition | Benefits and optionally current balances, and authorization details by category or service. | ||||
Short | Benefits and authorization details | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ces-1: SHALL contain a category or a billcode but not both. (category.exists() xor productOrService.exists() )ele-1: All FHIR elements must have a @value or children ( hasValue() or (children().count() > id.count()) ) | ||||
56. CoverageEligibilityResponse.insurance.item.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
58. CoverageEligibilityResponse.insurance.item.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
60. CoverageEligibilityResponse.insurance.item.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
62. CoverageEligibilityResponse.insurance.item.category | |||||
Definition | Code to identify the general type of benefits under which products and services are provided. | ||||
Short | Benefit classification | ||||
Comments | Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage. | ||||
Control | 0..1 | ||||
Binding | For example codes, see BenefitCategoryCodes (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory )Benefit categories such as: oral, medical, vision etc. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed to convey the category of service or product for which eligibility is sought. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
64. CoverageEligibilityResponse.insurance.item.productOrService | |||||
Definition | This contains the product, service, drug or other billing code for the item. | ||||
Short | Billing, service, product, or drug code | ||||
Comments | Code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). | ||||
Control | 0..1 | ||||
Binding | For example codes, see USCLSCodes (example to http://hl7.org/fhir/ValueSet/service-uscls )Allowable service and product codes. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed to convey the actual service or product for which eligibility is sought. | ||||
Alternate Names | Drug Code, Bill Code, Service Code | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
66. CoverageEligibilityResponse.insurance.item.modifier | |||||
Definition | Item typification or modifiers codes to convey additional context for the product or service. | ||||
Short | Product or service billing modifiers | ||||
Comments | For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours. | ||||
Control | 0..* | ||||
Binding | For example codes, see ModifierTypeCodes (example to http://hl7.org/fhir/ValueSet/claim-modifiers )Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | To support provision of the item or to charge an elevated fee. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
68. CoverageEligibilityResponse.insurance.item.provider | |||||
Definition | The practitioner who is eligible for the provision of the product or service. | ||||
Short | Performing practitioner | ||||
Control | 0..1 | ||||
Type | Reference(Practitioner, PractitionerRole) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed to convey the eligible provider. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
70. CoverageEligibilityResponse.insurance.item.excluded | |||||
Definition | True if the indicated class of service is excluded from the plan, missing or False indicates the product or service is included in the coverage. | ||||
Short | Excluded from the plan | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Needed to identify items that are specifically excluded from the coverage. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
72. CoverageEligibilityResponse.insurance.item.name | |||||
Definition | A short name or tag for the benefit. | ||||
Short | Short name for the benefit | ||||
Comments | For example: MED01, or DENT2. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Required to align with other plan names. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
74. CoverageEligibilityResponse.insurance.item.description | |||||
Definition | A richer description of the benefit or services covered. | ||||
Short | Description of the benefit or services covered | ||||
Comments | For example 'DENT2 covers 100% of basic, 50% of major but excludes Ortho, Implants and Cosmetic services'. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Needed for human readable reference. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
76. CoverageEligibilityResponse.insurance.item.network | |||||
Definition | Is a flag to indicate whether the benefits refer to in-network providers or out-of-network providers. | ||||
Short | In or out of network | ||||
Control | 0..1 | ||||
Binding | For example codes, see NetworkTypeCodes (example to http://hl7.org/fhir/ValueSet/benefit-network )Code to classify in or out of network services. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed as in or out of network providers are treated differently under the coverage. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
78. CoverageEligibilityResponse.insurance.item.unit | |||||
Definition | Indicates if the benefits apply to an individual or to the family. | ||||
Short | Individual or family | ||||
Control | 0..1 | ||||
Binding | For example codes, see UnitTypeCodes (example to http://hl7.org/fhir/ValueSet/benefit-unit )Unit covered/serviced - individual or family. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed for the understanding of the benefits. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
80. CoverageEligibilityResponse.insurance.item.term | |||||
Definition | The term or period of the values such as 'maximum lifetime benefit' or 'maximum annual visits'. | ||||
Short | Annual or lifetime | ||||
Control | 0..1 | ||||
Binding | For example codes, see BenefitTermCodes (example to http://hl7.org/fhir/ValueSet/benefit-term )Coverage unit - annual, lifetime. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed for the understanding of the benefits. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
82. CoverageEligibilityResponse.insurance.item.benefit | |||||
Definition | Benefits used to date. | ||||
Short | Benefit Summary | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
84. CoverageEligibilityResponse.insurance.item.benefit.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
86. CoverageEligibilityResponse.insurance.item.benefit.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
88. CoverageEligibilityResponse.insurance.item.benefit.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
90. CoverageEligibilityResponse.insurance.item.benefit.type | |||||
Definition | Classification of benefit being provided. | ||||
Short | Benefit classification | ||||
Comments | For example: deductible, visits, benefit amount. | ||||
Control | 1..1 | ||||
Binding | For example codes, see BenefitTypeCodes (example to http://hl7.org/fhir/ValueSet/benefit-type )Deductable, visits, co-pay, etc. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed to convey the nature of the benefit. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
92. CoverageEligibilityResponse.insurance.item.benefit.allowed[x] | |||||
Definition | The quantity of the benefit which is permitted under the coverage. | ||||
Short | Benefits allowed | ||||
Control | 0..1 | ||||
Type | Choice of: unsignedInt, string, Money | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Needed to convey the benefits offered under the coverage. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
94. CoverageEligibilityResponse.insurance.item.benefit.used[x] | |||||
Definition | The quantity of the benefit which have been consumed to date. | ||||
Short | Benefits used | ||||
Control | 0..1 | ||||
Type | Choice of: unsignedInt, string, Money | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Needed to convey the benefits consumed to date. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
96. CoverageEligibilityResponse.insurance.item.authorizationRequired | |||||
Definition | A boolean flag indicating whether a preauthorization is required prior to actual service delivery. | ||||
Short | Authorization required flag | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Needed to convey that preauthorization is required. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
98. CoverageEligibilityResponse.insurance.item.authorizationSupporting | |||||
Definition | Codes or comments regarding information or actions associated with the preauthorization. | ||||
Short | Type of required supporting materials | ||||
Control | 0..* | ||||
Binding | For example codes, see CoverageEligibilityResponseAuthSupportCodes (example to http://hl7.org/fhir/ValueSet/coverageeligibilityresponse-ex-auth-support )Type of supporting information to provide with a preauthorization. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed to inform the provider of collateral materials or actions needed for preauthorization. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
100. CoverageEligibilityResponse.insurance.item.authorizationUrl | |||||
Definition | A web location for obtaining requirements or descriptive information regarding the preauthorization. | ||||
Short | Preauthorization requirements endpoint | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Needed to enable insurers to advise providers of informative information. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
102. CoverageEligibilityResponse.preAuthRef | |||||
Definition | A reference from the Insurer to which these services pertain to be used on further communication and as proof that the request occurred. | ||||
Short | Preauthorization reference | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | To provide any preauthorization reference for provider use. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
104. CoverageEligibilityResponse.form | |||||
Definition | A code for the form to be used for printing the content. | ||||
Short | Printed form identifier | ||||
Comments | May be needed to identify specific jurisdictional forms. | ||||
Control | 0..1 | ||||
Binding | For example codes, see Form Codes (example to http://hl7.org/fhir/ValueSet/forms )The forms codes. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Needed to specify the specific form used for producing output for this response. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
106. CoverageEligibilityResponse.error | |||||
Definition | Errors encountered during the processing of the request. | ||||
Short | Processing errors | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Need to communicate processing issues to the requestor. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
108. CoverageEligibilityResponse.error.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
110. CoverageEligibilityResponse.error.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
112. CoverageEligibilityResponse.error.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
114. CoverageEligibilityResponse.error.code | |||||
Definition | An error code,from a specified code system, which details why the eligibility check could not be performed. | ||||
Short | Error code detailing processing issues | ||||
Control | 1..1 | ||||
Binding | For example codes, see Adjudication Error Codes (example to http://hl7.org/fhir/ValueSet/adjudication-error )The error codes for adjudication processing. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Required to convey processing errors. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |