Patient Master Identity Registry (PMIR)
1.5.0 - Trial-Implementation International flag

This page is part of the IHE Patient Master Identity Registry (PMIR) (v1.5.0: Trial Implementation) based on FHIR R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: AuditPmirSubscriptionDelete - Detailed Descriptions

Active as of 2022-08-08

Definitions for the IHE.PMIR.Audit.Subscription.Delete resource profile.

1. AuditEvent
Definition

A record of an event made for purposes of maintaining a security log. Typical uses include detection of intrusion attempts and monitoring for inappropriate usage.

Control0..*
Comments

Based on IHE-ATNA.

InvariantsDefined on this element
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. AuditEvent.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typestring
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. AuditEvent.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. AuditEvent.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. AuditEvent.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. AuditEvent.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. AuditEvent.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

8. AuditEvent.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. AuditEvent.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. AuditEvent.type
Definition

Identifier for a family of the event. For example, a menu item, program, rule, policy, function code, application name or URL. It identifies the performed function.

Control1..1
BindingThe codes SHALL be taken from AuditEventID; other codes may be used where these codes are not suitable Type of event.

TypeCoding
Requirements

This identifies the performed function. For "Execute" Event Action Code audit records, this identifies the application function performed.

Pattern Value<valueCoding xmlns="http://hl7.org/fhir">
  <system value="http://terminology.hl7.org/CodeSystem/audit-event-type"/>
  <code value="rest"/>
  <display value="Restful Operation"/>
</valueCoding>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. AuditEvent.subtype
Definition

Identifier for the category of event.

Control2..*
BindingThe codes SHALL be taken from AuditEventSub-Type; other codes may be used where these codes are not suitable Sub-type of event.

TypeCoding
Requirements

This field enables queries of messages by implementation-defined event categories.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AuditEvent.subtype. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
12. AuditEvent.subtype:anyDelete
SliceNameanyDelete
Definition

Identifier for the category of event.

Control1..1
BindingThe codes SHALL be taken from AuditEventSub-Type; other codes may be used where these codes are not suitable Sub-type of event.

TypeCoding
Requirements

This field enables queries of messages by implementation-defined event categories.

Fixed Value<valueCoding xmlns="http://hl7.org/fhir">
  <system value="http://hl7.org/fhir/restful-interaction"/>
  <code value="delete"/>
  <display value="delete"/>
</valueCoding>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. AuditEvent.subtype:iti94
SliceNameiti94
Definition

Identifier for the category of event.

Control1..1
BindingThe codes SHALL be taken from AuditEventSub-Type; other codes may be used where these codes are not suitable Sub-type of event.

TypeCoding
Requirements

This field enables queries of messages by implementation-defined event categories.

Pattern Value<valueCoding xmlns="http://hl7.org/fhir">
  <system value="urn:ihe:event-type-code"/>
  <code value="ITI-94"/>
  <display value="Subscribe to Patient Updates"/>
</valueCoding>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. AuditEvent.action
Definition

Indicator for type of action performed during the event that generated the audit.

Control0..1
BindingThe codes SHALL be taken from AuditEventAction Indicator for type of action performed during the event that generated the event.

Typecode
Requirements

This broadly indicates what kind of action was done on the AuditEvent.entity by the AuditEvent.agent.

Pattern ValueD
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. AuditEvent.period
Definition

The period during which the activity occurred.

Control0..1
TypePeriod
Comments

The period can be a little arbitrary; where possible, the time should correspond to human assessment of the activity time.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. AuditEvent.recorded
Definition

The time when the event was recorded.

Control1..1
Typeinstant
Requirements

This ties an event to a specific date and time. Security audits typically require a consistent time base (e.g. UTC), to eliminate time-zone issues arising from geographical distribution.

Comments

In a distributed system, some sort of common time base (e.g. an NTP [RFC1305] server) is a good implementation tactic.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. AuditEvent.outcome
Definition

Indicates whether the event succeeded or failed.

Control0..1
BindingThe codes SHALL be taken from AuditEventOutcome Indicates whether the event succeeded or failed.

Typecode
Comments

In some cases a "success" may be partial, for example, an incomplete or interrupted transfer of a radiological study. For the purpose of establishing accountability, these distinctions are not relevant.

Pattern Value0
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. AuditEvent.outcomeDesc
Definition

A free text description of the outcome of the event.

Control0..1
Typestring
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. AuditEvent.purposeOfEvent
Definition

The purposeOfUse (reason) that was used during the event being recorded.

Control0..*
BindingThe codes SHALL be taken from PurposeOfUse; other codes may be used where these codes are not suitable The reason the activity took place.

TypeCodeableConcept
Comments

Use AuditEvent.agent.purposeOfUse when you know that it is specific to the agent, otherwise use AuditEvent.purposeOfEvent. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. AuditEvent.agent
Definition

An actor taking an active role in the event or activity that is logged.

Control2..*
TypeBackboneElement
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AuditEvent.agent. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
21. AuditEvent.agent.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
22. AuditEvent.agent.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
23. AuditEvent.agent.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
24. AuditEvent.agent.type
Definition

Specification of the participation type the user plays when performing the event.

Control0..1
BindingThe codes SHALL be taken from ParticipationRoleType; other codes may be used where these codes are not suitable The Participation type of the agent to the event.

TypeCodeableConcept
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. AuditEvent.agent.role
Definition

The security role that the user was acting under, that come from local codes defined by the access control security system (e.g. RBAC, ABAC) used in the local context.

Control0..*
BindingFor example codes, see SecurityRoleType What security role enabled the agent to participate in the event.

TypeCodeableConcept
Requirements

This value ties an audited event to a user's role(s). It is an optional value that might be used to group events for analysis by user functional role categories.

Comments

Should be roles relevant to the event. Should not be an exhaustive list of roles.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. AuditEvent.agent.who
Definition

Reference to who this agent is that was involved in the event.

Control0..1
TypeReference(PractitionerRole | Practitioner | Organization | Device | Patient | RelatedPerson)
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Comments

Where a User ID is available it will go into who.identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. AuditEvent.agent.altId
Definition

Alternative agent Identifier. For a human, this should be a user identifier text string from authentication system. This identifier would be one known to a common authentication system (e.g. single sign-on), if available.

Control0..1
Typestring
Requirements

In some situations, a human user may authenticate with one identity but, to access a specific application system, may use a synonymous identify. For example, some "single sign on" implementations will do this. The alternative identifier would then be the original identify used for authentication, and the User ID is the one known to and used by the application.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. AuditEvent.agent.name
Definition

Human-meaningful name for the agent.

Control0..1
Typestring
Requirements

The User ID and Authorization User ID may be internal or otherwise obscure values. This field assists the auditor in identifying the actual user.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. AuditEvent.agent.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

Control1..1
Typeboolean
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. AuditEvent.agent.location
Definition

Where the event occurred.

Control0..1
TypeReference(Location)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. AuditEvent.agent.policy
Definition

The policy or plan that authorized the activity being recorded. Typically, a single activity may have multiple applicable policies, such as patient consent, guarantor funding, etc. The policy would also indicate the security token used.

Control0..*
Typeuri
Requirements

This value is used retrospectively to determine the authorization policies.

Comments

For example: Where an OAuth token authorizes, the unique identifier from the OAuth token is placed into the policy element Where a policy engine (e.g. XACML) holds policy logic, the unique policy identifier is placed into the policy element.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
32. AuditEvent.agent.media
Definition

Type of media involved. Used when the event is about exporting/importing onto media.

Control0..1
BindingThe codes SHALL be taken from MediaTypeCode; other codes may be used where these codes are not suitable Used when the event is about exporting/importing onto media.

TypeCoding
Requirements

Usually, this is used instead of specifying a network address. This field is not used for Media Id (i.e. the serial number of a CD).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
33. AuditEvent.agent.network
Definition

Logical network location for application activity, if the activity has a network location.

Control0..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. AuditEvent.agent.network.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
35. AuditEvent.agent.network.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
36. AuditEvent.agent.network.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
37. AuditEvent.agent.network.address
Definition

An identifier for the network access point of the user device for the audit event.

Control0..1
Typestring
Requirements

This datum identifies the user's network access point, which may be distinct from the server that performed the action. It is an optional value that may be used to group events recorded on separate servers for analysis of a specific network access point's data access across all servers.

Comments

This could be a device id, IP address or some other identifier associated with a device.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. AuditEvent.agent.network.type
Definition

An identifier for the type of network access point that originated the audit event.

Control0..1
BindingThe codes SHALL be taken from AuditEventAgentNetworkType The type of network access point of this agent in the audit event.

Typecode
Requirements

This datum identifies the type of network access point identifier of the user device for the audit event. It is an optional value that may be used to group events recorded on separate servers for analysis of access according to a network access point's type.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. AuditEvent.agent.purposeOfUse
Definition

The reason (purpose of use), specific to this agent, that was used during the event being recorded.

Control0..*
BindingThe codes SHALL be taken from PurposeOfUse; other codes may be used where these codes are not suitable The reason the activity took place.

TypeCodeableConcept
Comments

Use AuditEvent.agent.purposeOfUse when you know that is specific to the agent, otherwise use AuditEvent.purposeOfEvent. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. AuditEvent.agent:client
SliceNameclient
Definition

An actor taking an active role in the event or activity that is logged.

Control1..1
TypeBackboneElement
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
41. AuditEvent.agent:client.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
42. AuditEvent.agent:client.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
43. AuditEvent.agent:client.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
44. AuditEvent.agent:client.type
Definition

Specification of the participation type the user plays when performing the event.

Control1..1
BindingThe codes SHALL be taken from ParticipationRoleType; other codes may be used where these codes are not suitable The Participation type of the agent to the event.

TypeCodeableConcept
Pattern Value<valueCodeableConcept xmlns="http://hl7.org/fhir">
  <coding>
    <system value="http://dicom.nema.org/resources/ontology/DCM"/>
    <code value="110150"/>
    <display value="Application"/>
  </coding>
</valueCodeableConcept>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. AuditEvent.agent:client.role
Definition

The security role that the user was acting under, that come from local codes defined by the access control security system (e.g. RBAC, ABAC) used in the local context.

Control0..*
BindingFor example codes, see SecurityRoleType What security role enabled the agent to participate in the event.

TypeCodeableConcept
Requirements

This value ties an audited event to a user's role(s). It is an optional value that might be used to group events for analysis by user functional role categories.

Comments

Should be roles relevant to the event. Should not be an exhaustive list of roles.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. AuditEvent.agent:client.who
Definition

Reference to who this agent is that was involved in the event.

Control1..1
TypeReference(PractitionerRole | Practitioner | Organization | Device | Patient | RelatedPerson)
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Comments

Where a User ID is available it will go into who.identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
47. AuditEvent.agent:client.altId
Definition

Alternative agent Identifier. For a human, this should be a user identifier text string from authentication system. This identifier would be one known to a common authentication system (e.g. single sign-on), if available.

Control0..1
Typestring
Requirements

In some situations, a human user may authenticate with one identity but, to access a specific application system, may use a synonymous identify. For example, some "single sign on" implementations will do this. The alternative identifier would then be the original identify used for authentication, and the User ID is the one known to and used by the application.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. AuditEvent.agent:client.name
Definition

Human-meaningful name for the agent.

Control0..1
Typestring
Requirements

The User ID and Authorization User ID may be internal or otherwise obscure values. This field assists the auditor in identifying the actual user.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. AuditEvent.agent:client.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

Control1..1
Typeboolean
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
50. AuditEvent.agent:client.location
Definition

Where the event occurred.

Control0..1
TypeReference(Location)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
51. AuditEvent.agent:client.policy
Definition

The policy or plan that authorized the activity being recorded. Typically, a single activity may have multiple applicable policies, such as patient consent, guarantor funding, etc. The policy would also indicate the security token used.

Control0..*
Typeuri
Requirements

This value is used retrospectively to determine the authorization policies.

Comments

For example: Where an OAuth token authorizes, the unique identifier from the OAuth token is placed into the policy element Where a policy engine (e.g. XACML) holds policy logic, the unique policy identifier is placed into the policy element.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. AuditEvent.agent:client.media
Definition

Type of media involved. Used when the event is about exporting/importing onto media.

Control0..0
BindingThe codes SHALL be taken from MediaTypeCode; other codes may be used where these codes are not suitable Used when the event is about exporting/importing onto media.

TypeCoding
Requirements

Usually, this is used instead of specifying a network address. This field is not used for Media Id (i.e. the serial number of a CD).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
53. AuditEvent.agent:client.network
Definition

Logical network location for application activity, if the activity has a network location.

Control1..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
54. AuditEvent.agent:client.network.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
55. AuditEvent.agent:client.network.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
56. AuditEvent.agent:client.network.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
57. AuditEvent.agent:client.network.address
Definition

An identifier for the network access point of the user device for the audit event.

Control0..1
Typestring
Requirements

This datum identifies the user's network access point, which may be distinct from the server that performed the action. It is an optional value that may be used to group events recorded on separate servers for analysis of a specific network access point's data access across all servers.

Comments

This could be a device id, IP address or some other identifier associated with a device.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
58. AuditEvent.agent:client.network.type
Definition

An identifier for the type of network access point that originated the audit event.

Control0..1
BindingThe codes SHALL be taken from AuditEventAgentNetworkType The type of network access point of this agent in the audit event.

Typecode
Requirements

This datum identifies the type of network access point identifier of the user device for the audit event. It is an optional value that may be used to group events recorded on separate servers for analysis of access according to a network access point's type.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
59. AuditEvent.agent:client.purposeOfUse
Definition

The reason (purpose of use), specific to this agent, that was used during the event being recorded.

Control0..*
BindingThe codes SHALL be taken from PurposeOfUse; other codes may be used where these codes are not suitable The reason the activity took place.

TypeCodeableConcept
Comments

Use AuditEvent.agent.purposeOfUse when you know that is specific to the agent, otherwise use AuditEvent.purposeOfEvent. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
60. AuditEvent.agent:server
SliceNameserver
Definition

An actor taking an active role in the event or activity that is logged.

Control1..1
TypeBackboneElement
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
61. AuditEvent.agent:server.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
62. AuditEvent.agent:server.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
63. AuditEvent.agent:server.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
64. AuditEvent.agent:server.type
Definition

Specification of the participation type the user plays when performing the event.

Control1..1
BindingThe codes SHALL be taken from ParticipationRoleType; other codes may be used where these codes are not suitable The Participation type of the agent to the event.

TypeCodeableConcept
Pattern Value<valueCodeableConcept xmlns="http://hl7.org/fhir">
  <coding>
    <system value="http://terminology.hl7.org/CodeSystem/provenance-participant-type"/>
    <code value="custodian"/>
    <display value="Custodian"/>
  </coding>
</valueCodeableConcept>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
65. AuditEvent.agent:server.role
Definition

The security role that the user was acting under, that come from local codes defined by the access control security system (e.g. RBAC, ABAC) used in the local context.

Control0..*
BindingFor example codes, see SecurityRoleType What security role enabled the agent to participate in the event.

TypeCodeableConcept
Requirements

This value ties an audited event to a user's role(s). It is an optional value that might be used to group events for analysis by user functional role categories.

Comments

Should be roles relevant to the event. Should not be an exhaustive list of roles.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
66. AuditEvent.agent:server.who
Definition

Reference to who this agent is that was involved in the event.

Control1..1
TypeReference(PractitionerRole | Practitioner | Organization | Device | Patient | RelatedPerson)
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Comments

Where a User ID is available it will go into who.identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
67. AuditEvent.agent:server.altId
Definition

Alternative agent Identifier. For a human, this should be a user identifier text string from authentication system. This identifier would be one known to a common authentication system (e.g. single sign-on), if available.

Control0..1
Typestring
Requirements

In some situations, a human user may authenticate with one identity but, to access a specific application system, may use a synonymous identify. For example, some "single sign on" implementations will do this. The alternative identifier would then be the original identify used for authentication, and the User ID is the one known to and used by the application.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
68. AuditEvent.agent:server.name
Definition

Human-meaningful name for the agent.

Control0..1
Typestring
Requirements

The User ID and Authorization User ID may be internal or otherwise obscure values. This field assists the auditor in identifying the actual user.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
69. AuditEvent.agent:server.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

Control1..1
Typeboolean
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
70. AuditEvent.agent:server.location
Definition

Where the event occurred.

Control0..1
TypeReference(Location)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
71. AuditEvent.agent:server.policy
Definition

The policy or plan that authorized the activity being recorded. Typically, a single activity may have multiple applicable policies, such as patient consent, guarantor funding, etc. The policy would also indicate the security token used.

Control0..*
Typeuri
Requirements

This value is used retrospectively to determine the authorization policies.

Comments

For example: Where an OAuth token authorizes, the unique identifier from the OAuth token is placed into the policy element Where a policy engine (e.g. XACML) holds policy logic, the unique policy identifier is placed into the policy element.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
72. AuditEvent.agent:server.media
Definition

Type of media involved. Used when the event is about exporting/importing onto media.

Control0..0
BindingThe codes SHALL be taken from MediaTypeCode; other codes may be used where these codes are not suitable Used when the event is about exporting/importing onto media.

TypeCoding
Requirements

Usually, this is used instead of specifying a network address. This field is not used for Media Id (i.e. the serial number of a CD).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
73. AuditEvent.agent:server.network
Definition

Logical network location for application activity, if the activity has a network location.

Control1..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
74. AuditEvent.agent:server.network.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
75. AuditEvent.agent:server.network.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
76. AuditEvent.agent:server.network.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
77. AuditEvent.agent:server.network.address
Definition

An identifier for the network access point of the user device for the audit event.

Control0..1
Typestring
Requirements

This datum identifies the user's network access point, which may be distinct from the server that performed the action. It is an optional value that may be used to group events recorded on separate servers for analysis of a specific network access point's data access across all servers.

Comments

This could be a device id, IP address or some other identifier associated with a device.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
78. AuditEvent.agent:server.network.type
Definition

An identifier for the type of network access point that originated the audit event.

Control0..1
BindingThe codes SHALL be taken from AuditEventAgentNetworkType The type of network access point of this agent in the audit event.

Typecode
Requirements

This datum identifies the type of network access point identifier of the user device for the audit event. It is an optional value that may be used to group events recorded on separate servers for analysis of access according to a network access point's type.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
79. AuditEvent.agent:server.purposeOfUse
Definition

The reason (purpose of use), specific to this agent, that was used during the event being recorded.

Control0..*
BindingThe codes SHALL be taken from PurposeOfUse; other codes may be used where these codes are not suitable The reason the activity took place.

TypeCodeableConcept
Comments

Use AuditEvent.agent.purposeOfUse when you know that is specific to the agent, otherwise use AuditEvent.purposeOfEvent. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
80. AuditEvent.agent:user
SliceNameuser
Definition

An actor taking an active role in the event or activity that is logged.

Control0..1
TypeBackboneElement
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
81. AuditEvent.agent:user.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
82. AuditEvent.agent:user.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
83. AuditEvent.agent:user.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
84. AuditEvent.agent:user.type
Definition

Specification of the participation type the user plays when performing the event.

Control0..1
BindingThe codes SHALL be taken from participant source types for RESTful create
TypeCodeableConcept
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
85. AuditEvent.agent:user.role
Definition

The security role that the user was acting under, that come from local codes defined by the access control security system (e.g. RBAC, ABAC) used in the local context.

Control0..*
BindingFor example codes, see SecurityRoleType What security role enabled the agent to participate in the event.

TypeCodeableConcept
Must Supporttrue
Requirements

This value ties an audited event to a user's role(s). It is an optional value that might be used to group events for analysis by user functional role categories.

Comments

Should be roles relevant to the event. Should not be an exhaustive list of roles.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
86. AuditEvent.agent:user.who
Definition

Reference to who this agent is that was involved in the event.

Control1..1
TypeReference(PractitionerRole | Practitioner | Organization | Device | Patient | RelatedPerson)
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Comments

Where a User ID is available it will go into who.identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
87. AuditEvent.agent:user.altId
Definition

Alternative agent Identifier. For a human, this should be a user identifier text string from authentication system. This identifier would be one known to a common authentication system (e.g. single sign-on), if available.

Control0..1
Typestring
Requirements

In some situations, a human user may authenticate with one identity but, to access a specific application system, may use a synonymous identify. For example, some "single sign on" implementations will do this. The alternative identifier would then be the original identify used for authentication, and the User ID is the one known to and used by the application.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
88. AuditEvent.agent:user.name
Definition

Human-meaningful name for the agent.

Control0..1
Typestring
Must Supporttrue
Requirements

The User ID and Authorization User ID may be internal or otherwise obscure values. This field assists the auditor in identifying the actual user.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
89. AuditEvent.agent:user.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

Control1..1
Typeboolean
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

Pattern Valuetrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
90. AuditEvent.agent:user.location
Definition

Where the event occurred.

Control0..1
TypeReference(Location)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
91. AuditEvent.agent:user.policy
Definition

The policy or plan that authorized the activity being recorded. Typically, a single activity may have multiple applicable policies, such as patient consent, guarantor funding, etc. The policy would also indicate the security token used.

Control0..*
Typeuri
Requirements

This value is used retrospectively to determine the authorization policies.

Comments

For example: Where an OAuth token authorizes, the unique identifier from the OAuth token is placed into the policy element Where a policy engine (e.g. XACML) holds policy logic, the unique policy identifier is placed into the policy element.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
92. AuditEvent.agent:user.media
Definition

Type of media involved. Used when the event is about exporting/importing onto media.

Control0..0
BindingThe codes SHALL be taken from MediaTypeCode; other codes may be used where these codes are not suitable Used when the event is about exporting/importing onto media.

TypeCoding
Requirements

Usually, this is used instead of specifying a network address. This field is not used for Media Id (i.e. the serial number of a CD).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
93. AuditEvent.agent:user.network
Definition

Logical network location for application activity, if the activity has a network location.

Control0..0
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
94. AuditEvent.agent:user.purposeOfUse
Definition

The reason (purpose of use), specific to this agent, that was used during the event being recorded.

Control0..*
BindingThe codes SHALL be taken from PurposeOfUse; other codes may be used where these codes are not suitable The reason the activity took place.

TypeCodeableConcept
Must Supporttrue
Comments

Use AuditEvent.agent.purposeOfUse when you know that is specific to the agent, otherwise use AuditEvent.purposeOfEvent. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
95. AuditEvent.source
Definition

The system that is reporting the event.

Control1..1
TypeBackboneElement
Must Supporttrue
Requirements

The event is reported by one source.

Comments

Since multi-tier, distributed, or composite applications make source identification ambiguous, this collection of fields may repeat for each application or process actively involved in the event. For example, multiple value-sets can identify participating web servers, application processes, and database server threads in an n-tier distributed application. Passive event participants (e.g. low-level network transports) need not be identified.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
96. AuditEvent.source.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
97. AuditEvent.source.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
98. AuditEvent.source.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
99. AuditEvent.source.site
Definition

Logical source location within the healthcare enterprise network. For example, a hospital or other provider location within a multi-entity provider group.

Control0..1
Typestring
Requirements

This value differentiates among the sites in a multi-site enterprise health information system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
100. AuditEvent.source.observer
Definition

Identifier of the source where the event was detected.

Control1..1
TypeReference(PractitionerRole | Practitioner | Organization | Device | Patient | RelatedPerson)
Requirements

This field ties the event to a specific source system. It may be used to group events for analysis according to where the event was detected.

Alternate NamesSourceId
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
101. AuditEvent.source.type
Definition

Code specifying the type of source where event originated.

Control0..*
BindingThe codes SHALL be taken from AuditEventSourceType; other codes may be used where these codes are not suitable Code specifying the type of system that detected and recorded the event.

TypeCoding
Requirements

This field indicates which type of source is identified by the Audit Source ID. It is an optional value that may be used to group events for analysis according to the type of source where the event occurred.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
102. AuditEvent.entity
Definition

Specific instances of data or objects that have been accessed.

Control1..*
TypeBackboneElement
Requirements

The event may have other entities involved.

Alternate NamesParticipantObject
Comments

Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
sev-1: Either a name or a query (NOT both) (: name.empty() or query.empty())
SlicingThis element introduces a set of slices on AuditEvent.entity. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
103. AuditEvent.entity.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
104. AuditEvent.entity.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
105. AuditEvent.entity.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
106. AuditEvent.entity.what
Definition

Identifies a specific instance of the entity. The reference should be version specific.

Control0..1
TypeReference(Resource)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
107. AuditEvent.entity.type
Definition

The type of the object that was involved in this audit event.

Control0..1
BindingThe codes SHALL be taken from AuditEventEntityType; other codes may be used where these codes are not suitable Code for the entity type involved in the audit event.

TypeCoding
Requirements

To describe the object being acted upon. In addition to queries on the subject of the action in an auditable event, it is also important to be able to query on the object type for the action.

Comments

This value is distinct from the user's role or any user relationship to the entity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
108. AuditEvent.entity.role
Definition

Code representing the role the entity played in the event being audited.

Control0..1
BindingThe codes SHALL be taken from AuditEventEntityRole; other codes may be used where these codes are not suitable Code representing the role the entity played in the audit event.

TypeCoding
Requirements

For some detailed audit analysis it may be necessary to indicate a more granular type of entity, based on the application role it serves.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
109. AuditEvent.entity.lifecycle
Definition

Identifier for the data life-cycle stage for the entity.

Control0..1
BindingThe codes SHALL be taken from ObjectLifecycleEvents; other codes may be used where these codes are not suitable Identifier for the data life-cycle stage for the entity.

TypeCoding
Requirements

Institutional policies for privacy and security may optionally fall under different accountability rules based on data life cycle. This provides a differentiating value for those cases.

Comments

This can be used to provide an audit trail for data, over time, as it passes through the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
110. AuditEvent.entity.securityLabel
Definition

Security labels for the identified entity.

Control0..*
BindingThe codes SHALL be taken from All Security Labels; other codes may be used where these codes are not suitable Security Labels from the Healthcare Privacy and Security Classification System.

TypeCoding
Requirements

This field identifies the security labels for a specific instance of an object, such as a patient, to detect/track privacy and security issues.

Comments

Copied from entity meta security tags.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
111. AuditEvent.entity.name
Definition

A name of the entity in the audit event.

Control0..1 This element is affected by the following invariants: sev-1
Typestring
Requirements

Use only where entity can't be identified with an identifier.

Comments

This field may be used in a query/report to identify audit events for a specific person. For example, where multiple synonymous entity identifiers (patient number, medical record number, encounter number, etc.) have been used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
112. AuditEvent.entity.description
Definition

Text that describes the entity in more detail.

Control0..1
Typestring
Requirements

Use only where entity can't be identified with an identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
113. AuditEvent.entity.query
Definition

The query parameters for a query-type entities.

Control0..1 This element is affected by the following invariants: sev-1
Typebase64Binary
Requirements

For query events, it may be necessary to capture the actual query input to the query process in order to identify the specific event. Because of differences among query implementations and data encoding for them, this is a base 64 encoded data blob. It may be subsequently decoded or interpreted by downstream audit analysis processing.

Comments

The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example, if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
114. AuditEvent.entity.detail
Definition

Tagged value pairs for conveying additional information about the entity.

Control0..*
TypeBackboneElement
Requirements

Implementation-defined data about specific details of the object accessed or used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
115. AuditEvent.entity.detail.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
116. AuditEvent.entity.detail.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
117. AuditEvent.entity.detail.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
118. AuditEvent.entity.detail.type
Definition

The type of extra detail provided in the value.

Control1..1
Typestring
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
119. AuditEvent.entity.detail.value[x]
Definition

The value of the extra detail.

Control1..1
TypeChoice of: string, base64Binary
[x] NoteSee Choice of Data Types for further information about how to use [x]
Requirements

Should not duplicate the entity value unless absolutely necessary.

Comments

The value can be string when known to be a string, else base64 encoding should be used to protect binary or undefined content. The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
120. AuditEvent.entity:transaction
SliceNametransaction
Definition

Specific instances of data or objects that have been accessed.

Control0..1
TypeBackboneElement
Requirements

The event may have other entities involved.

Alternate NamesParticipantObject
Comments

Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
sev-1: Either a name or a query (NOT both) (: name.empty() or query.empty())
121. AuditEvent.entity:transaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
122. AuditEvent.entity:transaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
123. AuditEvent.entity:transaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
124. AuditEvent.entity:transaction.what
Definition

Identifies a specific instance of the entity. The reference should be version specific.

Control0..1
TypeReference(Resource)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
125. AuditEvent.entity:transaction.what.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
126. AuditEvent.entity:transaction.what.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on AuditEvent.entity.what.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
127. AuditEvent.entity:transaction.what.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Control0..1 This element is affected by the following invariants: ref-1
Typestring
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
128. AuditEvent.entity:transaction.what.type
Definition

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

Control0..1
BindingThe codes SHALL be taken from ResourceType; other codes may be used where these codes are not suitable Aa resource (or, for logical models, the URI of the logical model).

Typeuri
Comments

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
129. AuditEvent.entity:transaction.what.identifier
Definition

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
130. AuditEvent.entity:transaction.what.identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
131. AuditEvent.entity:transaction.what.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on AuditEvent.entity.what.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
132. AuditEvent.entity:transaction.what.identifier.use
Definition

The purpose of this identifier.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
133. AuditEvent.entity:transaction.what.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Control0..1
BindingThe codes SHALL be taken from Identifier Type Codes; other codes may be used where these codes are not suitable A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
134. AuditEvent.entity:transaction.what.identifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Control0..1
Typeuri
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Comments

Identifier.system is always case sensitive.

Example
General:http://www.acme.com/identifiers/patient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
135. AuditEvent.entity:transaction.what.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Control1..1
Typestring
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Example
General:123456
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
136. AuditEvent.entity:transaction.what.identifier.period
Definition

Time period during which identifier is/was valid for use.

Control0..1
TypePeriod
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
137. AuditEvent.entity:transaction.what.identifier.assigner
Definition

Organization that issued/manages the identifier.

Control0..1
TypeReference(Organization)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
138. AuditEvent.entity:transaction.what.display
Definition

Plain text narrative that identifies the resource in addition to the resource reference.

Control0..1
Typestring
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
139. AuditEvent.entity:transaction.type
Definition

The type of the object that was involved in this audit event.

Control1..1
BindingThe codes SHALL be taken from AuditEventEntityType; other codes may be used where these codes are not suitable Code for the entity type involved in the audit event.

TypeCoding
Requirements

To describe the object being acted upon. In addition to queries on the subject of the action in an auditable event, it is also important to be able to query on the object type for the action.

Comments

This value is distinct from the user's role or any user relationship to the entity.

Pattern Value<valueCoding xmlns="http://hl7.org/fhir">
  <system value="https://profiles.ihe.net/ITI/BALP/CodeSystem/BasicAuditEntityType"/>
  <code value="XrequestId"/>
</valueCoding>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
140. AuditEvent.entity:transaction.role
Definition

Code representing the role the entity played in the event being audited.

Control0..1
BindingThe codes SHALL be taken from AuditEventEntityRole; other codes may be used where these codes are not suitable Code representing the role the entity played in the audit event.

TypeCoding
Requirements

For some detailed audit analysis it may be necessary to indicate a more granular type of entity, based on the application role it serves.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
141. AuditEvent.entity:transaction.lifecycle
Definition

Identifier for the data life-cycle stage for the entity.

Control0..1
BindingThe codes SHALL be taken from ObjectLifecycleEvents; other codes may be used where these codes are not suitable Identifier for the data life-cycle stage for the entity.

TypeCoding
Requirements

Institutional policies for privacy and security may optionally fall under different accountability rules based on data life cycle. This provides a differentiating value for those cases.

Comments

This can be used to provide an audit trail for data, over time, as it passes through the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
142. AuditEvent.entity:transaction.securityLabel
Definition

Security labels for the identified entity.

Control0..*
BindingThe codes SHALL be taken from All Security Labels; other codes may be used where these codes are not suitable Security Labels from the Healthcare Privacy and Security Classification System.

TypeCoding
Requirements

This field identifies the security labels for a specific instance of an object, such as a patient, to detect/track privacy and security issues.

Comments

Copied from entity meta security tags.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
143. AuditEvent.entity:transaction.name
Definition

A name of the entity in the audit event.

Control0..1 This element is affected by the following invariants: sev-1
Typestring
Requirements

Use only where entity can't be identified with an identifier.

Comments

This field may be used in a query/report to identify audit events for a specific person. For example, where multiple synonymous entity identifiers (patient number, medical record number, encounter number, etc.) have been used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
144. AuditEvent.entity:transaction.description
Definition

Text that describes the entity in more detail.

Control0..1
Typestring
Requirements

Use only where entity can't be identified with an identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
145. AuditEvent.entity:transaction.query
Definition

The query parameters for a query-type entities.

Control0..1 This element is affected by the following invariants: sev-1
Typebase64Binary
Requirements

For query events, it may be necessary to capture the actual query input to the query process in order to identify the specific event. Because of differences among query implementations and data encoding for them, this is a base 64 encoded data blob. It may be subsequently decoded or interpreted by downstream audit analysis processing.

Comments

The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example, if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
146. AuditEvent.entity:transaction.detail
Definition

Tagged value pairs for conveying additional information about the entity.

Control0..*
TypeBackboneElement
Requirements

Implementation-defined data about specific details of the object accessed or used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
147. AuditEvent.entity:transaction.detail.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
148. AuditEvent.entity:transaction.detail.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
149. AuditEvent.entity:transaction.detail.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
150. AuditEvent.entity:transaction.detail.type
Definition

The type of extra detail provided in the value.

Control1..1
Typestring
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
151. AuditEvent.entity:transaction.detail.value[x]
Definition

The value of the extra detail.

Control1..1
TypeChoice of: string, base64Binary
[x] NoteSee Choice of Data Types for further information about how to use [x]
Requirements

Should not duplicate the entity value unless absolutely necessary.

Comments

The value can be string when known to be a string, else base64 encoding should be used to protect binary or undefined content. The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
152. AuditEvent.entity:data
SliceNamedata
Definition

Specific instances of data or objects that have been accessed.

Control1..1
TypeBackboneElement
Requirements

The event may have other entities involved.

Alternate NamesParticipantObject
Comments

Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
sev-1: Either a name or a query (NOT both) (: name.empty() or query.empty())
153. AuditEvent.entity:data.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
154. AuditEvent.entity:data.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
155. AuditEvent.entity:data.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
156. AuditEvent.entity:data.what
Definition

Identifies a specific instance of the entity. The reference should be version specific.

Control1..1
TypeReference(Resource)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
157. AuditEvent.entity:data.type
Definition

The type of the object that was involved in this audit event.

Control1..1
BindingThe codes SHALL be taken from AuditEventEntityType; other codes may be used where these codes are not suitable Code for the entity type involved in the audit event.

TypeCoding
Requirements

To describe the object being acted upon. In addition to queries on the subject of the action in an auditable event, it is also important to be able to query on the object type for the action.

Comments

This value is distinct from the user's role or any user relationship to the entity.

Pattern Value<valueCoding xmlns="http://hl7.org/fhir">
  <system value="http://terminology.hl7.org/CodeSystem/audit-entity-type"/>
  <code value="2"/>
  <display value="System Object"/>
</valueCoding>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
158. AuditEvent.entity:data.role
Definition

Code representing the role the entity played in the event being audited.

Control0..1
BindingThe codes SHALL be taken from RESTful objects role in the event
TypeCoding
Requirements

For some detailed audit analysis it may be necessary to indicate a more granular type of entity, based on the application role it serves.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
159. AuditEvent.entity:data.lifecycle
Definition

Identifier for the data life-cycle stage for the entity.

Control0..1
BindingThe codes SHALL be taken from ObjectLifecycleEvents; other codes may be used where these codes are not suitable Identifier for the data life-cycle stage for the entity.

TypeCoding
Requirements

Institutional policies for privacy and security may optionally fall under different accountability rules based on data life cycle. This provides a differentiating value for those cases.

Comments

This can be used to provide an audit trail for data, over time, as it passes through the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
160. AuditEvent.entity:data.securityLabel
Definition

Security labels for the identified entity.

Control0..*
BindingThe codes SHALL be taken from All Security Labels; other codes may be used where these codes are not suitable Security Labels from the Healthcare Privacy and Security Classification System.

TypeCoding
Requirements

This field identifies the security labels for a specific instance of an object, such as a patient, to detect/track privacy and security issues.

Comments

Copied from entity meta security tags.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
161. AuditEvent.entity:data.name
Definition

A name of the entity in the audit event.

Control0..1 This element is affected by the following invariants: sev-1
Typestring
Requirements

Use only where entity can't be identified with an identifier.

Comments

This field may be used in a query/report to identify audit events for a specific person. For example, where multiple synonymous entity identifiers (patient number, medical record number, encounter number, etc.) have been used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
162. AuditEvent.entity:data.description
Definition

Text that describes the entity in more detail.

Control0..1
Typestring
Requirements

Use only where entity can't be identified with an identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
163. AuditEvent.entity:data.query
Definition

The query parameters for a query-type entities.

Control0..1 This element is affected by the following invariants: sev-1
Typebase64Binary
Requirements

For query events, it may be necessary to capture the actual query input to the query process in order to identify the specific event. Because of differences among query implementations and data encoding for them, this is a base 64 encoded data blob. It may be subsequently decoded or interpreted by downstream audit analysis processing.

Comments

The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example, if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
164. AuditEvent.entity:data.detail
Definition

Tagged value pairs for conveying additional information about the entity.

Control0..*
TypeBackboneElement
Requirements

Implementation-defined data about specific details of the object accessed or used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
165. AuditEvent.entity:data.detail.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
166. AuditEvent.entity:data.detail.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
167. AuditEvent.entity:data.detail.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
168. AuditEvent.entity:data.detail.type
Definition

The type of extra detail provided in the value.

Control1..1
Typestring
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
169. AuditEvent.entity:data.detail.value[x]
Definition

The value of the extra detail.

Control1..1
TypeChoice of: string, base64Binary
[x] NoteSee Choice of Data Types for further information about how to use [x]
Requirements

Should not duplicate the entity value unless absolutely necessary.

Comments

The value can be string when known to be a string, else base64 encoding should be used to protect binary or undefined content. The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
170. AuditEvent.entity:patient
SliceNamepatient
Definition

Specific instances of data or objects that have been accessed.

Control0..*
TypeBackboneElement
Requirements

The event may have other entities involved.

Alternate NamesParticipantObject
Comments

Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
sev-1: Either a name or a query (NOT both) (: name.empty() or query.empty())
171. AuditEvent.entity:patient.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
172. AuditEvent.entity:patient.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
173. AuditEvent.entity:patient.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
174. AuditEvent.entity:patient.what
Definition

Identifies a specific instance of the entity. The reference should be version specific.

Control1..1
TypeReference(Patient)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
175. AuditEvent.entity:patient.type
Definition

The type of the object that was involved in this audit event.

Control1..1
BindingThe codes SHALL be taken from AuditEventEntityType; other codes may be used where these codes are not suitable Code for the entity type involved in the audit event.

TypeCoding
Requirements

To describe the object being acted upon. In addition to queries on the subject of the action in an auditable event, it is also important to be able to query on the object type for the action.

Comments

This value is distinct from the user's role or any user relationship to the entity.

Pattern Value<valueCoding xmlns="http://hl7.org/fhir">
  <system value="http://terminology.hl7.org/CodeSystem/audit-entity-type"/>
  <code value="1"/>
  <display value="Person"/>
</valueCoding>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
176. AuditEvent.entity:patient.role
Definition

Code representing the role the entity played in the event being audited.

Control0..1
BindingThe codes SHALL be taken from AuditEventEntityRole; other codes may be used where these codes are not suitable Code representing the role the entity played in the audit event.

TypeCoding
Requirements

For some detailed audit analysis it may be necessary to indicate a more granular type of entity, based on the application role it serves.

Pattern Value<valueCoding xmlns="http://hl7.org/fhir">
  <system value="http://terminology.hl7.org/CodeSystem/object-role"/>
  <code value="1"/>
  <display value="Patient"/>
</valueCoding>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
177. AuditEvent.entity:patient.lifecycle
Definition

Identifier for the data life-cycle stage for the entity.

Control0..1
BindingThe codes SHALL be taken from ObjectLifecycleEvents; other codes may be used where these codes are not suitable Identifier for the data life-cycle stage for the entity.

TypeCoding
Requirements

Institutional policies for privacy and security may optionally fall under different accountability rules based on data life cycle. This provides a differentiating value for those cases.

Comments

This can be used to provide an audit trail for data, over time, as it passes through the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
178. AuditEvent.entity:patient.securityLabel
Definition

Security labels for the identified entity.

Control0..*
BindingThe codes SHALL be taken from All Security Labels; other codes may be used where these codes are not suitable Security Labels from the Healthcare Privacy and Security Classification System.

TypeCoding
Requirements

This field identifies the security labels for a specific instance of an object, such as a patient, to detect/track privacy and security issues.

Comments

Copied from entity meta security tags.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
179. AuditEvent.entity:patient.name
Definition

A name of the entity in the audit event.

Control0..1 This element is affected by the following invariants: sev-1
Typestring
Requirements

Use only where entity can't be identified with an identifier.

Comments

This field may be used in a query/report to identify audit events for a specific person. For example, where multiple synonymous entity identifiers (patient number, medical record number, encounter number, etc.) have been used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
180. AuditEvent.entity:patient.description
Definition

Text that describes the entity in more detail.

Control0..1
Typestring
Requirements

Use only where entity can't be identified with an identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
181. AuditEvent.entity:patient.query
Definition

The query parameters for a query-type entities.

Control0..1 This element is affected by the following invariants: sev-1
Typebase64Binary
Requirements

For query events, it may be necessary to capture the actual query input to the query process in order to identify the specific event. Because of differences among query implementations and data encoding for them, this is a base 64 encoded data blob. It may be subsequently decoded or interpreted by downstream audit analysis processing.

Comments

The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example, if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
182. AuditEvent.entity:patient.detail
Definition

Tagged value pairs for conveying additional information about the entity.

Control0..*
TypeBackboneElement
Requirements

Implementation-defined data about specific details of the object accessed or used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
183. AuditEvent.entity:patient.detail.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
184. AuditEvent.entity:patient.detail.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
185. AuditEvent.entity:patient.detail.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
186. AuditEvent.entity:patient.detail.type
Definition

The type of extra detail provided in the value.

Control1..1
Typestring
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
187. AuditEvent.entity:patient.detail.value[x]
Definition

The value of the extra detail.

Control1..1
TypeChoice of: string, base64Binary
[x] NoteSee Choice of Data Types for further information about how to use [x]
Requirements

Should not duplicate the entity value unless absolutely necessary.

Comments

The value can be string when known to be a string, else base64 encoding should be used to protect binary or undefined content. The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))