Patient Demographics Query for Mobile (PDQm)
3.0.0 - Trial-Implementation
This page is part of the IHE Patient Demographics Query for Mobile (v3.0.0: Publication) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions
Active as of 2024-02-23 |
Definitions for the IHE.PDQm.MatchParametersIn resource profile.
Guidance on how to interpret the contents of this table can be found here
0. Parameters | |
2. Parameters.implicitRules | |
Control | 0..0 |
4. Parameters.parameter | |
Control | 1..3 |
Slicing | This element introduces a set of slices on Parameters.parameter . The slices are unordered and Closed, and can be differentiated using the following discriminators: |
6. Parameters.parameter.modifierExtension | |
Control | 0..0 |
8. Parameters.parameter:resource | |
Slice Name | resource |
Control | 1..1 |
10. Parameters.parameter:resource.modifierExtension | |
Control | 0..0 |
12. Parameters.parameter:resource.name | |
Pattern Value | resource |
14. Parameters.parameter:resource.value[x] | |
Control | 0..0 |
16. Parameters.parameter:resource.resource | |
Control | 1..? |
Type | Patient(PDQm Patient Profile for $match Input) |
18. Parameters.parameter:resource.part | |
Control | 0..0 |
20. Parameters.parameter:onlyCertainMatches | |
Slice Name | onlyCertainMatches |
Control | 0..1 |
22. Parameters.parameter:onlyCertainMatches.modifierExtension | |
Control | 0..0 |
24. Parameters.parameter:onlyCertainMatches.name | |
Pattern Value | onlyCertainMatches |
26. Parameters.parameter:onlyCertainMatches.value[x] | |
Control | 1..? |
Type | boolean |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
28. Parameters.parameter:onlyCertainMatches.resource | |
Control | 0..0 |
30. Parameters.parameter:onlyCertainMatches.part | |
Control | 0..0 |
32. Parameters.parameter:count | |
Slice Name | count |
Control | 0..1 |
34. Parameters.parameter:count.modifierExtension | |
Control | 0..0 |
36. Parameters.parameter:count.name | |
Pattern Value | count |
38. Parameters.parameter:count.value[x] | |
Control | 1..? |
Type | integer |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
40. Parameters.parameter:count.resource | |
Control | 0..0 |
42. Parameters.parameter:count.part | |
Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
0. Parameters | |
Definition | This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it. |
Short | Operation Request or Response |
Comments | The parameters that may be used are defined by the OperationDefinition resource. |
Control | 0..* |
Is Modifier | false |
Summary | false |
2. Parameters.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..01 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. Parameters.parameter | |
Definition | A parameter passed to or received from the operation. |
Short | Operation Parameter |
Control | 10..3* |
Type | BackboneElement |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())) )inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))) |
Slicing | This element introduces a set of slices on Parameters.parameter . The slices are unordered and Closed, and can be differentiated using the following discriminators: |
6. Parameters.parameter.modifierExtension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | ExtensionExtensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
8. Parameters.parameter.name | |
Definition | The name of the parameter (reference to the operation definition). |
Short | Name from the definition |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. Parameters.parameter:resource | |
Slice Name | resource |
Definition | A parameter passed to or received from the operation. |
Short | Operation Parameter |
Control | 10..1* |
Type | BackboneElement |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())) )inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))) |
12. Parameters.parameter:resource.modifierExtension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | ExtensionExtensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
14. Parameters.parameter:resource.name | |
Definition | The name of the parameter (reference to the operation definition). |
Short | Name from the definition |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Pattern Value | resource |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. Parameters.parameter:resource.value[x] | |
Definition | If the parameter is a data type. |
Short | If parameter is a data type |
Control | 0..01 This element is affected by the following invariants: inv-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. Parameters.parameter:resource.resource | |
Definition | Demographics and other administrative information about an individual or animal receiving care or other health-related services. If the parameter is a whole resource. |
Short | Information about an individual or animal receiving health care servicesIf parameter is a whole resource |
Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. |
Control | 10..1 This element is affected by the following invariants: inv-1 |
Type | PatientResource(PDQm Patient Profile for $match Input) |
Is Modifier | false |
Summary | false |
Alternate Names | SubjectOfCare Client Resident |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() ) |
20. Parameters.parameter:resource.part | |
Definition | A named part of a multi-part parameter. |
Short | Named part of a multi-part parameter |
Comments | Only one level of nested parameters is allowed. |
Control | 0..0* |
Type | See ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. Parameters.parameter:onlyCertainMatches | |
Slice Name | onlyCertainMatches |
Definition | A parameter passed to or received from the operation. |
Short | Operation Parameter |
Control | 0..1* |
Type | BackboneElement |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())) )inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))) |
24. Parameters.parameter:onlyCertainMatches.modifierExtension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | ExtensionExtensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
26. Parameters.parameter:onlyCertainMatches.name | |
Definition | The name of the parameter (reference to the operation definition). |
Short | Name from the definition |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Pattern Value | onlyCertainMatches |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
28. Parameters.parameter:onlyCertainMatches.value[x] | |
Definition | If the parameter is a data type. |
Short | If parameter is a data type |
Control | 10..1 This element is affected by the following invariants: inv-1 |
Type | boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
30. Parameters.parameter:onlyCertainMatches.resource | |
Definition | If the parameter is a whole resource. |
Short | If parameter is a whole resource |
Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. |
Control | 0..01 This element is affected by the following invariants: inv-1 |
Type | Resource |
Is Modifier | false |
Summary | true |
32. Parameters.parameter:onlyCertainMatches.part | |
Definition | A named part of a multi-part parameter. |
Short | Named part of a multi-part parameter |
Comments | Only one level of nested parameters is allowed. |
Control | 0..0* |
Type | See ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
34. Parameters.parameter:count | |
Slice Name | count |
Definition | A parameter passed to or received from the operation. |
Short | Operation Parameter |
Control | 0..1* |
Type | BackboneElement |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())) )inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))) |
36. Parameters.parameter:count.modifierExtension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | ExtensionExtensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
38. Parameters.parameter:count.name | |
Definition | The name of the parameter (reference to the operation definition). |
Short | Name from the definition |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Pattern Value | count |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
40. Parameters.parameter:count.value[x] | |
Definition | If the parameter is a data type. |
Short | If parameter is a data type |
Control | 10..1 This element is affected by the following invariants: inv-1 |
Type | integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
42. Parameters.parameter:count.resource | |
Definition | If the parameter is a whole resource. |
Short | If parameter is a whole resource |
Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. |
Control | 0..01 This element is affected by the following invariants: inv-1 |
Type | Resource |
Is Modifier | false |
Summary | true |
44. Parameters.parameter:count.part | |
Definition | A named part of a multi-part parameter. |
Short | Named part of a multi-part parameter |
Comments | Only one level of nested parameters is allowed. |
Control | 0..0* |
Type | See ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Parameters | |||||
Definition | This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it. | ||||
Short | Operation Request or Response | ||||
Comments | The parameters that may be used are defined by the OperationDefinition resource. | ||||
Control | 0..* | ||||
Is Modifier | false | ||||
Summary | false | ||||
2. Parameters.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Summary | true | ||||
4. Parameters.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. Parameters.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..0 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
8. Parameters.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
10. Parameters.parameter | |||||
Definition | A parameter passed to or received from the operation. | ||||
Short | Operation Parameter | ||||
Control | 1..3 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())) ) | ||||
Slicing | This element introduces a set of slices on Parameters.parameter . The slices are unordered and Closed, and can be differentiated using the following discriminators: | ||||
12. Parameters.parameter.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
14. Parameters.parameter.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
16. Parameters.parameter.modifierExtension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
18. Parameters.parameter.name | |||||
Definition | The name of the parameter (reference to the operation definition). | ||||
Short | Name from the definition | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
20. Parameters.parameter.value[x] | |||||
Definition | If the parameter is a data type. | ||||
Short | If parameter is a data type | ||||
Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
22. Parameters.parameter.resource | |||||
Definition | If the parameter is a whole resource. | ||||
Short | If parameter is a whole resource | ||||
Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | true | ||||
24. Parameters.parameter.part | |||||
Definition | A named part of a multi-part parameter. | ||||
Short | Named part of a multi-part parameter | ||||
Comments | Only one level of nested parameters is allowed. | ||||
Control | 0..* | ||||
Type | See ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
26. Parameters.parameter:resource | |||||
Slice Name | resource | ||||
Definition | A parameter passed to or received from the operation. | ||||
Short | Operation Parameter | ||||
Control | 1..1 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())) ) | ||||
28. Parameters.parameter:resource.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
30. Parameters.parameter:resource.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
32. Parameters.parameter:resource.modifierExtension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
34. Parameters.parameter:resource.name | |||||
Definition | The name of the parameter (reference to the operation definition). | ||||
Short | Name from the definition | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Pattern Value | resource | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
36. Parameters.parameter:resource.value[x] | |||||
Definition | If the parameter is a data type. | ||||
Short | If parameter is a data type | ||||
Control | 0..0 This element is affected by the following invariants: inv-1 | ||||
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
38. Parameters.parameter:resource.resource | |||||
Definition | Demographics and other administrative information about an individual or animal receiving care or other health-related services. | ||||
Short | Information about an individual or animal receiving health care services | ||||
Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
Control | 1..1 | ||||
Type | Patient(PDQm Patient Profile for $match Input) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | SubjectOfCare Client Resident | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() ) | ||||
40. Parameters.parameter:resource.part | |||||
Definition | A named part of a multi-part parameter. | ||||
Short | Named part of a multi-part parameter | ||||
Comments | Only one level of nested parameters is allowed. | ||||
Control | 0..0 | ||||
Type | See ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
42. Parameters.parameter:onlyCertainMatches | |||||
Slice Name | onlyCertainMatches | ||||
Definition | A parameter passed to or received from the operation. | ||||
Short | Operation Parameter | ||||
Control | 0..1 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())) ) | ||||
44. Parameters.parameter:onlyCertainMatches.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
46. Parameters.parameter:onlyCertainMatches.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
48. Parameters.parameter:onlyCertainMatches.modifierExtension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
50. Parameters.parameter:onlyCertainMatches.name | |||||
Definition | The name of the parameter (reference to the operation definition). | ||||
Short | Name from the definition | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Pattern Value | onlyCertainMatches | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
52. Parameters.parameter:onlyCertainMatches.value[x] | |||||
Definition | If the parameter is a data type. | ||||
Short | If parameter is a data type | ||||
Control | 1..1 This element is affected by the following invariants: inv-1 | ||||
Type | boolean | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
54. Parameters.parameter:onlyCertainMatches.resource | |||||
Definition | If the parameter is a whole resource. | ||||
Short | If parameter is a whole resource | ||||
Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
Control | 0..0 This element is affected by the following invariants: inv-1 | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | true | ||||
56. Parameters.parameter:onlyCertainMatches.part | |||||
Definition | A named part of a multi-part parameter. | ||||
Short | Named part of a multi-part parameter | ||||
Comments | Only one level of nested parameters is allowed. | ||||
Control | 0..0 | ||||
Type | See ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
58. Parameters.parameter:count | |||||
Slice Name | count | ||||
Definition | A parameter passed to or received from the operation. | ||||
Short | Operation Parameter | ||||
Control | 0..1 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())) ) | ||||
60. Parameters.parameter:count.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
62. Parameters.parameter:count.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
64. Parameters.parameter:count.modifierExtension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
66. Parameters.parameter:count.name | |||||
Definition | The name of the parameter (reference to the operation definition). | ||||
Short | Name from the definition | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Pattern Value | count | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
68. Parameters.parameter:count.value[x] | |||||
Definition | If the parameter is a data type. | ||||
Short | If parameter is a data type | ||||
Control | 1..1 This element is affected by the following invariants: inv-1 | ||||
Type | integer | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
70. Parameters.parameter:count.resource | |||||
Definition | If the parameter is a whole resource. | ||||
Short | If parameter is a whole resource | ||||
Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
Control | 0..0 This element is affected by the following invariants: inv-1 | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | true | ||||
72. Parameters.parameter:count.part | |||||
Definition | A named part of a multi-part parameter. | ||||
Short | Named part of a multi-part parameter | ||||
Comments | Only one level of nested parameters is allowed. | ||||
Control | 0..0 | ||||
Type | See ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |