Non-patient File Sharing (NPFS)
2.2.0 - Trial-Implementation International flag

This page is part of the Non-patient File Sharing (NPFS) (v2.2.0: Publication) based on FHIR R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: AuditSubmitFileSource - Detailed Descriptions

Active as of 2023-11-16

Definitions for the IHE.NPFS.SubmitFile.Audit.Source resource profile.

Guidance on how to interpret the contents of this table can be found here

0. AuditEvent
2. AuditEvent.modifierExtension
Control0..0
4. AuditEvent.type
Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://dicom.nema.org/resources/ontology/DCM&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;110106&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Export&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
6. AuditEvent.subtype
Control1..?
SlicingThis element introduces a set of slices on AuditEvent.subtype. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
8. AuditEvent.subtype:iti87
Slice Nameiti87
Control1..1
Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;urn:ihe:event-type-code&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;ITI-87&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Submit&nbsp;File&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
10. AuditEvent.action
Pattern ValueR
12. AuditEvent.outcome
Control1..?
14. AuditEvent.outcomeDesc
Must Supporttrue
16. AuditEvent.agent
Control2..?
SlicingThis element introduces a set of slices on AuditEvent.agent. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
18. AuditEvent.agent:fileSource
Slice NamefileSource
ShortFile Source
Control1..1
Invariantsval-audit-source: The Audit Source is this agent too. ($this.who = %resource.source.observer)
20. AuditEvent.agent:fileSource.type
Control1..?
Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://dicom.nema.org/resources/ontology/DCM&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;110153&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Source&nbsp;Role&nbsp;ID&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
22. AuditEvent.agent:fileSource.who
Control1..?
24. AuditEvent.agent:fileSource.network
Control1..?
26. AuditEvent.agent:fileManager
Slice NamefileManager
ShortFile Manager
Control1..1
28. AuditEvent.agent:fileManager.type
Control1..?
Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://dicom.nema.org/resources/ontology/DCM&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;110152&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Destination&nbsp;Role&nbsp;ID&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
30. AuditEvent.agent:fileManager.who
Control1..?
32. AuditEvent.agent:fileManager.network
Control1..?
34. AuditEvent.entity
Control1..1
SlicingThis element introduces a set of slices on AuditEvent.entity. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • pattern @ type
36. AuditEvent.entity:docRef
Slice NamedocRef
ShortdocumentReference
Control1..1
38. AuditEvent.entity:docRef.what
Control1..?
TypeReference(DocumentReference)
40. AuditEvent.entity:docRef.type
Control1..?
Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/audit-entity-type&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;2&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;System&nbsp;Object&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
42. AuditEvent.entity:docRef.role
Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/object-role&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;20&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Job&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>

Guidance on how to interpret the contents of this table can be found here

0. AuditEvent
Definition

A record of an event made for purposes of maintaining a security log. Typical uses include detection of intrusion attempts and monitoring for inappropriate usage.

ShortEvent record kept for security purposes
Comments

Based on IHE-ATNA.

Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. AuditEvent.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. AuditEvent.modifierExtension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensionExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. AuditEvent.type
Definition

Identifier for a family of the event. For example, a menu item, program, rule, policy, function code, application name or URL. It identifies the performed function.

ShortType/identifier of event
Control1..1
BindingUnless not suitable, these codes SHALL be taken from AuditEventIDhttp://hl7.org/fhir/ValueSet/audit-event-type

Type of event.

TypeCoding
Is Modifierfalse
Summarytrue
Requirements

This identifies the performed function. For "Execute" Event Action Code audit records, this identifies the application function performed.

Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://dicom.nema.org/resources/ontology/DCM&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;110106&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Export&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. AuditEvent.subtype
Definition

Identifier for the category of event.

ShortMore specific type/id for the event
Control10..*
BindingUnless not suitable, these codes SHALL be taken from AuditEventSub-Typehttp://hl7.org/fhir/ValueSet/audit-event-sub-type

Sub-type of event.

TypeCoding
Is Modifierfalse
Summarytrue
Requirements

This field enables queries of messages by implementation-defined event categories.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AuditEvent.subtype. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
10. AuditEvent.subtype:iti87
Slice Nameiti87
Definition

Identifier for the category of event.

ShortMore specific type/id for the event
Control10..1*
BindingUnless not suitable, these codes SHALL be taken from AuditEventSub-Typehttp://hl7.org/fhir/ValueSet/audit-event-sub-type

Sub-type of event.

TypeCoding
Is Modifierfalse
Summarytrue
Requirements

This field enables queries of messages by implementation-defined event categories.

Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;urn:ihe:event-type-code&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;ITI-87&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Submit&nbsp;File&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. AuditEvent.action
Definition

Indicator for type of action performed during the event that generated the audit.

ShortType of action performed during the event
Control0..1
BindingThe codes SHALL be taken from AuditEventActionhttp://hl7.org/fhir/ValueSet/audit-event-action|4.0.1

Indicator for type of action performed during the event that generated the event.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This broadly indicates what kind of action was done on the AuditEvent.entity by the AuditEvent.agent.

Pattern ValueR
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. AuditEvent.recorded
Definition

The time when the event was recorded.

ShortTime when the event was recorded
Comments

In a distributed system, some sort of common time base (e.g. an NTP [RFC1305] server) is a good implementation tactic.

Control1..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This ties an event to a specific date and time. Security audits typically require a consistent time base (e.g. UTC), to eliminate time-zone issues arising from geographical distribution.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. AuditEvent.outcome
Definition

Indicates whether the event succeeded or failed.

ShortWhether the event succeeded or failed
Comments

In some cases a "success" may be partial, for example, an incomplete or interrupted transfer of a radiological study. For the purpose of establishing accountability, these distinctions are not relevant.

Control10..1
BindingThe codes SHALL be taken from AuditEventOutcomehttp://hl7.org/fhir/ValueSet/audit-event-outcome|4.0.1

Indicates whether the event succeeded or failed.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. AuditEvent.outcomeDesc
Definition

A free text description of the outcome of the event.

ShortDescription of the event outcome
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. AuditEvent.agent
Definition

An actor taking an active role in the event or activity that is logged.

ShortActor involved in the event
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

Control21..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AuditEvent.agent. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
22. AuditEvent.agent.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. AuditEvent.agent.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

ShortWhether user is initiator
Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

Control1..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. AuditEvent.agent:fileSource
Slice NamefileSource
Definition

An actor taking an active role in the event or activity that is logged.

ShortFile SourceActor involved in the event
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

Control1..1*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
val-audit-source: The Audit Source is this agent too. ($this.who = %resource.source.observer)
28. AuditEvent.agent:fileSource.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. AuditEvent.agent:fileSource.type
Definition

Specification of the participation type the user plays when performing the event.

ShortHow agent participated
Control10..1
BindingUnless not suitable, these codes SHALL be taken from ParticipationRoleTypehttp://hl7.org/fhir/ValueSet/participation-role-type

The Participation type of the agent to the event.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://dicom.nema.org/resources/ontology/DCM&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;110153&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Source&nbsp;Role&nbsp;ID&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. AuditEvent.agent:fileSource.who
Definition

Reference to who this agent is that was involved in the event.

ShortIdentifier of who
Comments

Where a User ID is available it will go into who.identifier.

Control10..1
TypeReference(PractitionerRole, Practitioner, Organization, Device, Patient, RelatedPerson)
Is Modifierfalse
Summarytrue
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. AuditEvent.agent:fileSource.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

ShortWhether user is initiator
Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

Control1..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. AuditEvent.agent:fileSource.network
Definition

Logical network location for application activity, if the activity has a network location.

ShortLogical network location for application activity
Control10..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. AuditEvent.agent:fileSource.network.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. AuditEvent.agent:fileManager
Slice NamefileManager
Definition

An actor taking an active role in the event or activity that is logged.

ShortFile ManagerActor involved in the event
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

Control1..1*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. AuditEvent.agent:fileManager.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. AuditEvent.agent:fileManager.type
Definition

Specification of the participation type the user plays when performing the event.

ShortHow agent participated
Control10..1
BindingUnless not suitable, these codes SHALL be taken from ParticipationRoleTypehttp://hl7.org/fhir/ValueSet/participation-role-type

The Participation type of the agent to the event.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://dicom.nema.org/resources/ontology/DCM&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;110152&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Destination&nbsp;Role&nbsp;ID&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. AuditEvent.agent:fileManager.who
Definition

Reference to who this agent is that was involved in the event.

ShortIdentifier of who
Comments

Where a User ID is available it will go into who.identifier.

Control10..1
TypeReference(PractitionerRole, Practitioner, Organization, Device, Patient, RelatedPerson)
Is Modifierfalse
Summarytrue
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. AuditEvent.agent:fileManager.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

ShortWhether user is initiator
Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

Control1..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. AuditEvent.agent:fileManager.network
Definition

Logical network location for application activity, if the activity has a network location.

ShortLogical network location for application activity
Control10..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. AuditEvent.agent:fileManager.network.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. AuditEvent.source
Definition

The system that is reporting the event.

ShortAudit Event Reporter
Comments

Since multi-tier, distributed, or composite applications make source identification ambiguous, this collection of fields may repeat for each application or process actively involved in the event. For example, multiple value-sets can identify participating web servers, application processes, and database server threads in an n-tier distributed application. Passive event participants (e.g. low-level network transports) need not be identified.

Control1..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

The event is reported by one source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. AuditEvent.source.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
58. AuditEvent.source.observer
Definition

Identifier of the source where the event was detected.

ShortThe identity of source detecting the event
Control1..1
TypeReference(PractitionerRole, Practitioner, Organization, Device, Patient, RelatedPerson)
Is Modifierfalse
Summarytrue
Requirements

This field ties the event to a specific source system. It may be used to group events for analysis according to where the event was detected.

Alternate NamesSourceId
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. AuditEvent.entity
Definition

Specific instances of data or objects that have been accessed.

ShortData or objects used
Comments

Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

The event may have other entities involved.

Alternate NamesParticipantObject
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sev-1: Either a name or a query (NOT both) (name.empty() or query.empty())
sev-1: Either a name or a query (NOT both) (name.empty() or query.empty())
SlicingThis element introduces a set of slices on AuditEvent.entity. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • pattern @ type
62. AuditEvent.entity.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. AuditEvent.entity:docRef
Slice NamedocRef
Definition

Specific instances of data or objects that have been accessed.

ShortdocumentReferenceData or objects used
Comments

Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

The event may have other entities involved.

Alternate NamesParticipantObject
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sev-1: Either a name or a query (NOT both) (name.empty() or query.empty())
sev-1: Either a name or a query (NOT both) (name.empty() or query.empty())
66. AuditEvent.entity:docRef.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
68. AuditEvent.entity:docRef.what
Definition

Identifies a specific instance of the entity. The reference should be version specific.

ShortSpecific instance of resource
Control10..1
TypeReference(DocumentReference, Resource)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. AuditEvent.entity:docRef.type
Definition

The type of the object that was involved in this audit event.

ShortType of entity involved
Comments

This value is distinct from the user's role or any user relationship to the entity.

Control10..1
BindingUnless not suitable, these codes SHALL be taken from AuditEventEntityTypehttp://hl7.org/fhir/ValueSet/audit-entity-type

Code for the entity type involved in the audit event.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

To describe the object being acted upon. In addition to queries on the subject of the action in an auditable event, it is also important to be able to query on the object type for the action.

Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/audit-entity-type&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;2&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;System&nbsp;Object&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. AuditEvent.entity:docRef.role
Definition

Code representing the role the entity played in the event being audited.

ShortWhat role the entity played
Control0..1
BindingUnless not suitable, these codes SHALL be taken from AuditEventEntityRolehttp://hl7.org/fhir/ValueSet/object-role

Code representing the role the entity played in the audit event.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

For some detailed audit analysis it may be necessary to indicate a more granular type of entity, based on the application role it serves.

Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/object-role&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;20&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Job&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. AuditEvent
Definition

A record of an event made for purposes of maintaining a security log. Typical uses include detection of intrusion attempts and monitoring for inappropriate usage.

ShortEvent record kept for security purposes
Comments

Based on IHE-ATNA.

Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. AuditEvent.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. AuditEvent.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. AuditEvent.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. AuditEvent.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. AuditEvent.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. AuditEvent.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. AuditEvent.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. AuditEvent.modifierExtension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. AuditEvent.type
Definition

Identifier for a family of the event. For example, a menu item, program, rule, policy, function code, application name or URL. It identifies the performed function.

ShortType/identifier of event
Control1..1
BindingUnless not suitable, these codes SHALL be taken from AuditEventID

Type of event.

TypeCoding
Is Modifierfalse
Summarytrue
Requirements

This identifies the performed function. For "Execute" Event Action Code audit records, this identifies the application function performed.

Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://dicom.nema.org/resources/ontology/DCM&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;110106&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Export&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. AuditEvent.subtype
Definition

Identifier for the category of event.

ShortMore specific type/id for the event
Control1..*
BindingUnless not suitable, these codes SHALL be taken from AuditEventSub-Type

Sub-type of event.

TypeCoding
Is Modifierfalse
Summarytrue
Requirements

This field enables queries of messages by implementation-defined event categories.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AuditEvent.subtype. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
22. AuditEvent.subtype:iti87
Slice Nameiti87
Definition

Identifier for the category of event.

ShortMore specific type/id for the event
Control1..1
BindingUnless not suitable, these codes SHALL be taken from AuditEventSub-Type

Sub-type of event.

TypeCoding
Is Modifierfalse
Summarytrue
Requirements

This field enables queries of messages by implementation-defined event categories.

Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;urn:ihe:event-type-code&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;ITI-87&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Submit&nbsp;File&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. AuditEvent.action
Definition

Indicator for type of action performed during the event that generated the audit.

ShortType of action performed during the event
Control0..1
BindingThe codes SHALL be taken from AuditEventAction

Indicator for type of action performed during the event that generated the event.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This broadly indicates what kind of action was done on the AuditEvent.entity by the AuditEvent.agent.

Pattern ValueR
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. AuditEvent.period
Definition

The period during which the activity occurred.

ShortWhen the activity occurred
Comments

The period can be a little arbitrary; where possible, the time should correspond to human assessment of the activity time.

Control0..1
TypePeriod
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. AuditEvent.recorded
Definition

The time when the event was recorded.

ShortTime when the event was recorded
Comments

In a distributed system, some sort of common time base (e.g. an NTP [RFC1305] server) is a good implementation tactic.

Control1..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This ties an event to a specific date and time. Security audits typically require a consistent time base (e.g. UTC), to eliminate time-zone issues arising from geographical distribution.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. AuditEvent.outcome
Definition

Indicates whether the event succeeded or failed.

ShortWhether the event succeeded or failed
Comments

In some cases a "success" may be partial, for example, an incomplete or interrupted transfer of a radiological study. For the purpose of establishing accountability, these distinctions are not relevant.

Control1..1
BindingThe codes SHALL be taken from AuditEventOutcome

Indicates whether the event succeeded or failed.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. AuditEvent.outcomeDesc
Definition

A free text description of the outcome of the event.

ShortDescription of the event outcome
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. AuditEvent.purposeOfEvent
Definition

The purposeOfUse (reason) that was used during the event being recorded.

ShortThe purposeOfUse of the event
Comments

Use AuditEvent.agent.purposeOfUse when you know that it is specific to the agent, otherwise use AuditEvent.purposeOfEvent. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from PurposeOfUse

The reason the activity took place.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. AuditEvent.agent
Definition

An actor taking an active role in the event or activity that is logged.

ShortActor involved in the event
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

Control2..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AuditEvent.agent. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
38. AuditEvent.agent.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
40. AuditEvent.agent.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
42. AuditEvent.agent.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. AuditEvent.agent.type
Definition

Specification of the participation type the user plays when performing the event.

ShortHow agent participated
Control0..1
BindingUnless not suitable, these codes SHALL be taken from ParticipationRoleType

The Participation type of the agent to the event.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. AuditEvent.agent.role
Definition

The security role that the user was acting under, that come from local codes defined by the access control security system (e.g. RBAC, ABAC) used in the local context.

ShortAgent role in the event
Comments

Should be roles relevant to the event. Should not be an exhaustive list of roles.

Control0..*
BindingFor example codes, see SecurityRoleType

What security role enabled the agent to participate in the event.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

This value ties an audited event to a user's role(s). It is an optional value that might be used to group events for analysis by user functional role categories.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. AuditEvent.agent.who
Definition

Reference to who this agent is that was involved in the event.

ShortIdentifier of who
Comments

Where a User ID is available it will go into who.identifier.

Control0..1
TypeReference(PractitionerRole, Practitioner, Organization, Device, Patient, RelatedPerson)
Is Modifierfalse
Summarytrue
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. AuditEvent.agent.altId
Definition

Alternative agent Identifier. For a human, this should be a user identifier text string from authentication system. This identifier would be one known to a common authentication system (e.g. single sign-on), if available.

ShortAlternative User identity
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

In some situations, a human user may authenticate with one identity but, to access a specific application system, may use a synonymous identify. For example, some "single sign on" implementations will do this. The alternative identifier would then be the original identify used for authentication, and the User ID is the one known to and used by the application.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. AuditEvent.agent.name
Definition

Human-meaningful name for the agent.

ShortHuman friendly name for the agent
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

The User ID and Authorization User ID may be internal or otherwise obscure values. This field assists the auditor in identifying the actual user.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. AuditEvent.agent.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

ShortWhether user is initiator
Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

Control1..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. AuditEvent.agent.location
Definition

Where the event occurred.

ShortWhere
Control0..1
TypeReference(Location)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. AuditEvent.agent.policy
Definition

The policy or plan that authorized the activity being recorded. Typically, a single activity may have multiple applicable policies, such as patient consent, guarantor funding, etc. The policy would also indicate the security token used.

ShortPolicy that authorized event
Comments

For example: Where an OAuth token authorizes, the unique identifier from the OAuth token is placed into the policy element Where a policy engine (e.g. XACML) holds policy logic, the unique policy identifier is placed into the policy element.

Control0..*
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This value is used retrospectively to determine the authorization policies.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. AuditEvent.agent.media
Definition

Type of media involved. Used when the event is about exporting/importing onto media.

ShortType of media
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MediaTypeCode

Used when the event is about exporting/importing onto media.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

Usually, this is used instead of specifying a network address. This field is not used for Media Id (i.e. the serial number of a CD).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. AuditEvent.agent.network
Definition

Logical network location for application activity, if the activity has a network location.

ShortLogical network location for application activity
Control0..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. AuditEvent.agent.network.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
66. AuditEvent.agent.network.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
68. AuditEvent.agent.network.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
70. AuditEvent.agent.network.address
Definition

An identifier for the network access point of the user device for the audit event.

ShortIdentifier for the network access point of the user device
Comments

This could be a device id, IP address or some other identifier associated with a device.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This datum identifies the user's network access point, which may be distinct from the server that performed the action. It is an optional value that may be used to group events recorded on separate servers for analysis of a specific network access point's data access across all servers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. AuditEvent.agent.network.type
Definition

An identifier for the type of network access point that originated the audit event.

ShortThe type of network access point
Control0..1
BindingThe codes SHALL be taken from AuditEventAgentNetworkType

The type of network access point of this agent in the audit event.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This datum identifies the type of network access point identifier of the user device for the audit event. It is an optional value that may be used to group events recorded on separate servers for analysis of access according to a network access point's type.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. AuditEvent.agent.purposeOfUse
Definition

The reason (purpose of use), specific to this agent, that was used during the event being recorded.

ShortReason given for this user
Comments

Use AuditEvent.agent.purposeOfUse when you know that is specific to the agent, otherwise use AuditEvent.purposeOfEvent. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from PurposeOfUse

The reason the activity took place.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. AuditEvent.agent:fileSource
Slice NamefileSource
Definition

An actor taking an active role in the event or activity that is logged.

ShortFile Source
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

Control1..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
val-audit-source: The Audit Source is this agent too. ($this.who = %resource.source.observer)
78. AuditEvent.agent:fileSource.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
80. AuditEvent.agent:fileSource.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
82. AuditEvent.agent:fileSource.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
84. AuditEvent.agent:fileSource.type
Definition

Specification of the participation type the user plays when performing the event.

ShortHow agent participated
Control1..1
BindingUnless not suitable, these codes SHALL be taken from ParticipationRoleType

The Participation type of the agent to the event.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://dicom.nema.org/resources/ontology/DCM&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;110153&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Source&nbsp;Role&nbsp;ID&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. AuditEvent.agent:fileSource.role
Definition

The security role that the user was acting under, that come from local codes defined by the access control security system (e.g. RBAC, ABAC) used in the local context.

ShortAgent role in the event
Comments

Should be roles relevant to the event. Should not be an exhaustive list of roles.

Control0..*
BindingFor example codes, see SecurityRoleType

What security role enabled the agent to participate in the event.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

This value ties an audited event to a user's role(s). It is an optional value that might be used to group events for analysis by user functional role categories.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. AuditEvent.agent:fileSource.who
Definition

Reference to who this agent is that was involved in the event.

ShortIdentifier of who
Comments

Where a User ID is available it will go into who.identifier.

Control1..1
TypeReference(PractitionerRole, Practitioner, Organization, Device, Patient, RelatedPerson)
Is Modifierfalse
Summarytrue
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. AuditEvent.agent:fileSource.altId
Definition

Alternative agent Identifier. For a human, this should be a user identifier text string from authentication system. This identifier would be one known to a common authentication system (e.g. single sign-on), if available.

ShortAlternative User identity
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

In some situations, a human user may authenticate with one identity but, to access a specific application system, may use a synonymous identify. For example, some "single sign on" implementations will do this. The alternative identifier would then be the original identify used for authentication, and the User ID is the one known to and used by the application.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. AuditEvent.agent:fileSource.name
Definition

Human-meaningful name for the agent.

ShortHuman friendly name for the agent
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

The User ID and Authorization User ID may be internal or otherwise obscure values. This field assists the auditor in identifying the actual user.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. AuditEvent.agent:fileSource.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

ShortWhether user is initiator
Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

Control1..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. AuditEvent.agent:fileSource.location
Definition

Where the event occurred.

ShortWhere
Control0..1
TypeReference(Location)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. AuditEvent.agent:fileSource.policy
Definition

The policy or plan that authorized the activity being recorded. Typically, a single activity may have multiple applicable policies, such as patient consent, guarantor funding, etc. The policy would also indicate the security token used.

ShortPolicy that authorized event
Comments

For example: Where an OAuth token authorizes, the unique identifier from the OAuth token is placed into the policy element Where a policy engine (e.g. XACML) holds policy logic, the unique policy identifier is placed into the policy element.

Control0..*
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This value is used retrospectively to determine the authorization policies.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. AuditEvent.agent:fileSource.media
Definition

Type of media involved. Used when the event is about exporting/importing onto media.

ShortType of media
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MediaTypeCode

Used when the event is about exporting/importing onto media.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

Usually, this is used instead of specifying a network address. This field is not used for Media Id (i.e. the serial number of a CD).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. AuditEvent.agent:fileSource.network
Definition

Logical network location for application activity, if the activity has a network location.

ShortLogical network location for application activity
Control1..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. AuditEvent.agent:fileSource.network.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
106. AuditEvent.agent:fileSource.network.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
108. AuditEvent.agent:fileSource.network.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
110. AuditEvent.agent:fileSource.network.address
Definition

An identifier for the network access point of the user device for the audit event.

ShortIdentifier for the network access point of the user device
Comments

This could be a device id, IP address or some other identifier associated with a device.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This datum identifies the user's network access point, which may be distinct from the server that performed the action. It is an optional value that may be used to group events recorded on separate servers for analysis of a specific network access point's data access across all servers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. AuditEvent.agent:fileSource.network.type
Definition

An identifier for the type of network access point that originated the audit event.

ShortThe type of network access point
Control0..1
BindingThe codes SHALL be taken from AuditEventAgentNetworkType

The type of network access point of this agent in the audit event.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This datum identifies the type of network access point identifier of the user device for the audit event. It is an optional value that may be used to group events recorded on separate servers for analysis of access according to a network access point's type.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. AuditEvent.agent:fileSource.purposeOfUse
Definition

The reason (purpose of use), specific to this agent, that was used during the event being recorded.

ShortReason given for this user
Comments

Use AuditEvent.agent.purposeOfUse when you know that is specific to the agent, otherwise use AuditEvent.purposeOfEvent. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from PurposeOfUse

The reason the activity took place.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. AuditEvent.agent:fileManager
Slice NamefileManager
Definition

An actor taking an active role in the event or activity that is logged.

ShortFile Manager
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

Control1..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. AuditEvent.agent:fileManager.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
120. AuditEvent.agent:fileManager.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
122. AuditEvent.agent:fileManager.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
124. AuditEvent.agent:fileManager.type
Definition

Specification of the participation type the user plays when performing the event.

ShortHow agent participated
Control1..1
BindingUnless not suitable, these codes SHALL be taken from ParticipationRoleType

The Participation type of the agent to the event.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://dicom.nema.org/resources/ontology/DCM&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;110152&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Destination&nbsp;Role&nbsp;ID&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
126. AuditEvent.agent:fileManager.role
Definition

The security role that the user was acting under, that come from local codes defined by the access control security system (e.g. RBAC, ABAC) used in the local context.

ShortAgent role in the event
Comments

Should be roles relevant to the event. Should not be an exhaustive list of roles.

Control0..*
BindingFor example codes, see SecurityRoleType

What security role enabled the agent to participate in the event.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

This value ties an audited event to a user's role(s). It is an optional value that might be used to group events for analysis by user functional role categories.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. AuditEvent.agent:fileManager.who
Definition

Reference to who this agent is that was involved in the event.

ShortIdentifier of who
Comments

Where a User ID is available it will go into who.identifier.

Control1..1
TypeReference(PractitionerRole, Practitioner, Organization, Device, Patient, RelatedPerson)
Is Modifierfalse
Summarytrue
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. AuditEvent.agent:fileManager.altId
Definition

Alternative agent Identifier. For a human, this should be a user identifier text string from authentication system. This identifier would be one known to a common authentication system (e.g. single sign-on), if available.

ShortAlternative User identity
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

In some situations, a human user may authenticate with one identity but, to access a specific application system, may use a synonymous identify. For example, some "single sign on" implementations will do this. The alternative identifier would then be the original identify used for authentication, and the User ID is the one known to and used by the application.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. AuditEvent.agent:fileManager.name
Definition

Human-meaningful name for the agent.

ShortHuman friendly name for the agent
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

The User ID and Authorization User ID may be internal or otherwise obscure values. This field assists the auditor in identifying the actual user.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
134. AuditEvent.agent:fileManager.requestor
Definition

Indicator that the user is or is not the requestor, or initiator, for the event being audited.

ShortWhether user is initiator
Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

Control1..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
136. AuditEvent.agent:fileManager.location
Definition

Where the event occurred.

ShortWhere
Control0..1
TypeReference(Location)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
138. AuditEvent.agent:fileManager.policy
Definition

The policy or plan that authorized the activity being recorded. Typically, a single activity may have multiple applicable policies, such as patient consent, guarantor funding, etc. The policy would also indicate the security token used.

ShortPolicy that authorized event
Comments

For example: Where an OAuth token authorizes, the unique identifier from the OAuth token is placed into the policy element Where a policy engine (e.g. XACML) holds policy logic, the unique policy identifier is placed into the policy element.

Control0..*
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This value is used retrospectively to determine the authorization policies.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
140. AuditEvent.agent:fileManager.media
Definition

Type of media involved. Used when the event is about exporting/importing onto media.

ShortType of media
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MediaTypeCode

Used when the event is about exporting/importing onto media.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

Usually, this is used instead of specifying a network address. This field is not used for Media Id (i.e. the serial number of a CD).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
142. AuditEvent.agent:fileManager.network
Definition

Logical network location for application activity, if the activity has a network location.

ShortLogical network location for application activity
Control1..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. AuditEvent.agent:fileManager.network.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
146. AuditEvent.agent:fileManager.network.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
148. AuditEvent.agent:fileManager.network.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
150. AuditEvent.agent:fileManager.network.address
Definition

An identifier for the network access point of the user device for the audit event.

ShortIdentifier for the network access point of the user device
Comments

This could be a device id, IP address or some other identifier associated with a device.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This datum identifies the user's network access point, which may be distinct from the server that performed the action. It is an optional value that may be used to group events recorded on separate servers for analysis of a specific network access point's data access across all servers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
152. AuditEvent.agent:fileManager.network.type
Definition

An identifier for the type of network access point that originated the audit event.

ShortThe type of network access point
Control0..1
BindingThe codes SHALL be taken from AuditEventAgentNetworkType

The type of network access point of this agent in the audit event.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This datum identifies the type of network access point identifier of the user device for the audit event. It is an optional value that may be used to group events recorded on separate servers for analysis of access according to a network access point's type.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. AuditEvent.agent:fileManager.purposeOfUse
Definition

The reason (purpose of use), specific to this agent, that was used during the event being recorded.

ShortReason given for this user
Comments

Use AuditEvent.agent.purposeOfUse when you know that is specific to the agent, otherwise use AuditEvent.purposeOfEvent. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from PurposeOfUse

The reason the activity took place.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
156. AuditEvent.source
Definition

The system that is reporting the event.

ShortAudit Event Reporter
Comments

Since multi-tier, distributed, or composite applications make source identification ambiguous, this collection of fields may repeat for each application or process actively involved in the event. For example, multiple value-sets can identify participating web servers, application processes, and database server threads in an n-tier distributed application. Passive event participants (e.g. low-level network transports) need not be identified.

Control1..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

The event is reported by one source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
158. AuditEvent.source.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
160. AuditEvent.source.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
162. AuditEvent.source.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
164. AuditEvent.source.site
Definition

Logical source location within the healthcare enterprise network. For example, a hospital or other provider location within a multi-entity provider group.

ShortLogical source location within the enterprise
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

This value differentiates among the sites in a multi-site enterprise health information system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
166. AuditEvent.source.observer
Definition

Identifier of the source where the event was detected.

ShortThe identity of source detecting the event
Control1..1
TypeReference(PractitionerRole, Practitioner, Organization, Device, Patient, RelatedPerson)
Is Modifierfalse
Summarytrue
Requirements

This field ties the event to a specific source system. It may be used to group events for analysis according to where the event was detected.

Alternate NamesSourceId
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
168. AuditEvent.source.type
Definition

Code specifying the type of source where event originated.

ShortThe type of source where event originated
Control0..*
BindingUnless not suitable, these codes SHALL be taken from AuditEventSourceType

Code specifying the type of system that detected and recorded the event.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

This field indicates which type of source is identified by the Audit Source ID. It is an optional value that may be used to group events for analysis according to the type of source where the event occurred.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
170. AuditEvent.entity
Definition

Specific instances of data or objects that have been accessed.

ShortData or objects used
Comments

Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

Control1..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

The event may have other entities involved.

Alternate NamesParticipantObject
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sev-1: Either a name or a query (NOT both) (name.empty() or query.empty())
SlicingThis element introduces a set of slices on AuditEvent.entity. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • pattern @ type
172. AuditEvent.entity.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
174. AuditEvent.entity.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
176. AuditEvent.entity.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
178. AuditEvent.entity.what
Definition

Identifies a specific instance of the entity. The reference should be version specific.

ShortSpecific instance of resource
Control0..1
TypeReference(Resource)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
180. AuditEvent.entity.type
Definition

The type of the object that was involved in this audit event.

ShortType of entity involved
Comments

This value is distinct from the user's role or any user relationship to the entity.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from AuditEventEntityType

Code for the entity type involved in the audit event.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

To describe the object being acted upon. In addition to queries on the subject of the action in an auditable event, it is also important to be able to query on the object type for the action.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
182. AuditEvent.entity.role
Definition

Code representing the role the entity played in the event being audited.

ShortWhat role the entity played
Control0..1
BindingUnless not suitable, these codes SHALL be taken from AuditEventEntityRole

Code representing the role the entity played in the audit event.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

For some detailed audit analysis it may be necessary to indicate a more granular type of entity, based on the application role it serves.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
184. AuditEvent.entity.lifecycle
Definition

Identifier for the data life-cycle stage for the entity.

ShortLife-cycle stage for the entity
Comments

This can be used to provide an audit trail for data, over time, as it passes through the system.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from ObjectLifecycleEvents

Identifier for the data life-cycle stage for the entity.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

Institutional policies for privacy and security may optionally fall under different accountability rules based on data life cycle. This provides a differentiating value for those cases.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
186. AuditEvent.entity.securityLabel
Definition

Security labels for the identified entity.

ShortSecurity labels on the entity
Comments

Copied from entity meta security tags.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from All Security Labels

Security Labels from the Healthcare Privacy and Security Classification System.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

This field identifies the security labels for a specific instance of an object, such as a patient, to detect/track privacy and security issues.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
188. AuditEvent.entity.name
Definition

A name of the entity in the audit event.

ShortDescriptor for entity
Comments

This field may be used in a query/report to identify audit events for a specific person. For example, where multiple synonymous entity identifiers (patient number, medical record number, encounter number, etc.) have been used.

Control0..1
This element is affected by the following invariants: sev-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Use only where entity can't be identified with an identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
190. AuditEvent.entity.description
Definition

Text that describes the entity in more detail.

ShortDescriptive text
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Use only where entity can't be identified with an identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
192. AuditEvent.entity.query
Definition

The query parameters for a query-type entities.

ShortQuery parameters
Comments

The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example, if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

Control0..1
This element is affected by the following invariants: sev-1
Typebase64Binary
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

For query events, it may be necessary to capture the actual query input to the query process in order to identify the specific event. Because of differences among query implementations and data encoding for them, this is a base 64 encoded data blob. It may be subsequently decoded or interpreted by downstream audit analysis processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
194. AuditEvent.entity.detail
Definition

Tagged value pairs for conveying additional information about the entity.

ShortAdditional Information about the entity
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Implementation-defined data about specific details of the object accessed or used.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
196. AuditEvent.entity.detail.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
198. AuditEvent.entity.detail.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
200. AuditEvent.entity.detail.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
202. AuditEvent.entity.detail.type
Definition

The type of extra detail provided in the value.

ShortName of the property
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
204. AuditEvent.entity.detail.value[x]
Definition

The value of the extra detail.

ShortProperty value
Comments

The value can be string when known to be a string, else base64 encoding should be used to protect binary or undefined content. The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

Control1..1
TypeChoice of: string, base64Binary
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Should not duplicate the entity value unless absolutely necessary.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
206. AuditEvent.entity:docRef
Slice NamedocRef
Definition

Specific instances of data or objects that have been accessed.

ShortdocumentReference
Comments

Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

Control1..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

The event may have other entities involved.

Alternate NamesParticipantObject
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sev-1: Either a name or a query (NOT both) (name.empty() or query.empty())
208. AuditEvent.entity:docRef.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
210. AuditEvent.entity:docRef.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
212. AuditEvent.entity:docRef.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
214. AuditEvent.entity:docRef.what
Definition

Identifies a specific instance of the entity. The reference should be version specific.

ShortSpecific instance of resource
Control1..1
TypeReference(DocumentReference)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
216. AuditEvent.entity:docRef.type
Definition

The type of the object that was involved in this audit event.

ShortType of entity involved
Comments

This value is distinct from the user's role or any user relationship to the entity.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from AuditEventEntityType

Code for the entity type involved in the audit event.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

To describe the object being acted upon. In addition to queries on the subject of the action in an auditable event, it is also important to be able to query on the object type for the action.

Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/audit-entity-type&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;2&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;System&nbsp;Object&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
218. AuditEvent.entity:docRef.role
Definition

Code representing the role the entity played in the event being audited.

ShortWhat role the entity played
Control0..1
BindingUnless not suitable, these codes SHALL be taken from AuditEventEntityRole

Code representing the role the entity played in the audit event.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

For some detailed audit analysis it may be necessary to indicate a more granular type of entity, based on the application role it serves.

Pattern Value&lt;valueCoding&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/object-role&quot;/&gt;<br/>&nbsp;&nbsp;&lt;code&nbsp;value=&quot;20&quot;/&gt;<br/>&nbsp;&nbsp;&lt;display&nbsp;value=&quot;Job&quot;/&gt;<br/>&lt;/valueCoding&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
220. AuditEvent.entity:docRef.lifecycle
Definition

Identifier for the data life-cycle stage for the entity.

ShortLife-cycle stage for the entity
Comments

This can be used to provide an audit trail for data, over time, as it passes through the system.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from ObjectLifecycleEvents

Identifier for the data life-cycle stage for the entity.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

Institutional policies for privacy and security may optionally fall under different accountability rules based on data life cycle. This provides a differentiating value for those cases.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
222. AuditEvent.entity:docRef.securityLabel
Definition

Security labels for the identified entity.

ShortSecurity labels on the entity
Comments

Copied from entity meta security tags.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from All Security Labels

Security Labels from the Healthcare Privacy and Security Classification System.

TypeCoding
Is Modifierfalse
Summaryfalse
Requirements

This field identifies the security labels for a specific instance of an object, such as a patient, to detect/track privacy and security issues.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
224. AuditEvent.entity:docRef.name
Definition

A name of the entity in the audit event.

ShortDescriptor for entity
Comments

This field may be used in a query/report to identify audit events for a specific person. For example, where multiple synonymous entity identifiers (patient number, medical record number, encounter number, etc.) have been used.

Control0..1
This element is affected by the following invariants: sev-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Use only where entity can't be identified with an identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
226. AuditEvent.entity:docRef.description
Definition

Text that describes the entity in more detail.

ShortDescriptive text
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Use only where entity can't be identified with an identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
228. AuditEvent.entity:docRef.query
Definition

The query parameters for a query-type entities.

ShortQuery parameters
Comments

The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example, if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

Control0..1
This element is affected by the following invariants: sev-1
Typebase64Binary
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

For query events, it may be necessary to capture the actual query input to the query process in order to identify the specific event. Because of differences among query implementations and data encoding for them, this is a base 64 encoded data blob. It may be subsequently decoded or interpreted by downstream audit analysis processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
230. AuditEvent.entity:docRef.detail
Definition

Tagged value pairs for conveying additional information about the entity.

ShortAdditional Information about the entity
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Implementation-defined data about specific details of the object accessed or used.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
232. AuditEvent.entity:docRef.detail.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
234. AuditEvent.entity:docRef.detail.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
236. AuditEvent.entity:docRef.detail.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
238. AuditEvent.entity:docRef.detail.type
Definition

The type of extra detail provided in the value.

ShortName of the property
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
240. AuditEvent.entity:docRef.detail.value[x]
Definition

The value of the extra detail.

ShortProperty value
Comments

The value can be string when known to be a string, else base64 encoding should be used to protect binary or undefined content. The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, AuditEvent.entity.type, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

Control1..1
TypeChoice of: string, base64Binary
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Should not duplicate the entity value unless absolutely necessary.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))